BC205XLT.2
BC205XLT.2
REASSEMBLY
7. Insert the top of the front panel into the slot under the
volume/squelch control panel and, noting carefully the alignment of
the dual inline connector at the bottom of the board with the
mating socket, press the front panel firmly into place. Be sure
that the holes at the bottom of the circuit board line up with the
holes in the plastic standoffs below them. Insert the two screws
and gently tighten them.
8. Replace the back cover by inserting the top of the cover into the
slot under the volume/squelch control panel; press the cover into
place, insert and tighten the screws.
9. Reposition the battery retaining spring (slotted side toward
notched hole), insert the two remaining screws and gently but
securely tighten them.
CONTINUED IN FILE BC205XLT.5
REASSEMBLY
7. Insert the top of the front panel into the slot under the
volume/squelch control panel and, noting carefully the alignment of
the dual inline connector at the bottom of the board with the
mating socket, press the front panel firmly into place. Be sure
that the holes at the bottom of the circuit board line up with the
holes in the plastic standoffs below them. Insert the two screws
and gently tighten them.
8. Replace the back cover by inserting the top of the cover into the
slot under the volume/squelch control panel; press the cover into
place, insert and tighten the screws.
9. Reposition the battery retaining spring (slotted side toward
notched hole), insert the two remaining screws and gently but
securely tighten them.
CONTINUED IN FILE BC205XLT.5
Comments
Post a Comment