Zen and the Art of the Internet

There are several versions of this text with printing commands

included for .dvi and most other publishing formats. This one

is strictly intended for etext uses, and has had hyphens at an

end of line position removed to facilitate searching the text.

***************************************************************

Part A

Zen and the Art of the Internet

Permission is granted to make and distribute verbatim copies of this

guide provided the copyright notice and this permission notice are

preserved on all copies.

Permission is granted to copy and distribute modified versions of

this booklet under the conditions for verbatim copying, provided that

the entire resulting derived work is distributed under the terms of a

permission notice identical to this one.

Permission is granted to copy and distribute translations of this

booklet into another language, under the above conditions for

modified versions, except that this permission notice may be stated

in a translation approved by the author.

Zen and the Art of the Internet

A Beginner's Guide to the Internet

First Edition

January 1992

by Brendan P. Kehoe

This is revision 1.0 of February 2, 1992.

The composition of this booklet was originally started because the

Computer Science department at Widener University was in desperate

need of documentation describing the capabilities of this ``great new

Internet link'' we obtained.

It's since grown into an effort to acquaint the reader with much of

what's currently available over the Internet. Aimed at the novice

user, it attempts to remain operating system ``neutral''---little

information herein is specific to Unix, VMS, or any other

environment. This booklet will, hopefully, be usable by nearly

anyone.

A user's session is usually offset from the rest of the paragraph, as

such:

prompt> command

The results are usually displayed here.

The purpose of this booklet is two-fold: first, it's intended to

serve as a reference piece, which someone can easily grab on the fly

and look something up. Also, it forms a foundation from which people

can explore the vast expanse of the Internet. Zen and the Art of the

Internet doesn't spend a significant amount of time on any one point;

rather, it provides enough for people to learn the specifics of what

his or her local system offers.

One warning is perhaps in order---this territory we are entering can

become a fantastic time-sink. Hours can slip by, people can come and

go, and you'll be locked into Cyberspace. Remember to do your work!

With that, I welcome you, the new user, to The Net.

brendan@cs.widener.edu

Chester, PA

Acknowledgements

Certain sections in this booklet are not my original work---rather,

they are derived from documents that were available on the Internet

and already aptly stated their areas of concentration. The chapter

on Usenet is, in large part, made up of what's posted monthly to

news.announce.newusers, with some editing and rewriting. Also, the

main section on archie was derived from whatis.archie by Peter

Deutsch of the McGill University Computing Centre. It's available

via anonymous FTP from archie.mcgill.ca. Much of what's in the

telnet section came from an impressive introductory document put

together by SuraNet. Some definitions in the one are from an

excellent glossary put together by Colorado State University.

This guide would not be the same without the aid of many people on The

Net, and the providers of resources that are already out there. I'd

like to thank the folks who gave this a read-through and returned some

excellent comments, suggestions, and criticisms, and those who

provided much-needed information on the fly. Glee Willis deserves

particular mention for all of his work; this guide would have been

considerably less polished without his help.

Andy Blankenbiller <rablanke@crdec7.apgea.army.mil>

Andy Blankenbiller, Army at Aberdeen

bajan@cs.mcgill.ca

Alan Emtage, McGill University Computer Science Department

Brian Fitzgerald <fitz@mml0.meche.rpi.edu>

Brian Fitzgerald, Rensselaer Polytechnic Institute

John Goetsch <ccjg@hippo.ru.ac.za>

John Goetsch, Rhodes University, South Africa

composer@chem.bu.edu

Jeff Kellem, Boston University's Chemistry Department

kraussW@moravian.edu

Bill Krauss, Moravian College

Steve Lodin <deaes!swlodin@iuvax.cs.indiana.edu>

Steve Lodin, Delco Electronics

Mike Nesel <nesel@elxsi.dfrf.nasa.gov>

Mike Nesel, NASA

Bob <neveln@cs.widener.edu>

Bob Neveln, Widener University Computer Science Department

wamapi@dunkin.cc.mcgill.ca (Wanda Pierce)

Wanda Pierce, McGill University Computing Centre

Joshua.R.Poulson@cyber.widener.edu

Joshua Poulson, Widener University Computing Services

de5@ornl.gov

Dave Sill, Oak Ridge National Laboratory

bsmart@bsmart.tti.com

Bob Smart, CitiCorp/TTI

emv@msen.com

Ed Vielmetti, Vice President of MSEN

Craig E. Ward <cew@venera.isi.edu>

Craig Ward, USC/Information Sciences Institute (ISI)

Glee Willis <willis@unssun.nevada.edu>

Glee Willis, University of Nevada, Reno

Charles Yamasaki <chip@oshcomm.osha.gov>

Chip Yamasaki, OSHA

Network Basics

We are truly in an information society. Now more than ever, moving

vast amounts of information quickly across great distances is one of

our most pressing needs. From small one-person entrepreneurial

efforts, to the largest of corporations, more and more professional

people are discovering that the only way to be successful in the '90s

and beyond is to realize that technology is advancing at a break-neck

pace---and they must somehow keep up. Likewise, researchers from all

corners of the earth are finding that their work thrives in a

networked environment. Immediate access to the work of colleagues

and a ``virtual'' library of millions of volumes and thousands of

papers affords them the ability to encorporate a body of knowledge

heretofore unthinkable. Work groups can now conduct interactive

conferences with each other, paying no heed to physical

location---the possibilities are endless.

You have at your fingertips the ability to talk in ``real-time'' with

someone in Japan, send a 2,000-word short story to a group of people

who will critique it for the sheer pleasure of doing so, see if a

Macintosh sitting in a lab in Canada is turned on, and find out if

someone happens to be sitting in front of their computer (logged on)

in Australia, all inside of thirty minutes. No airline (or tardis,

for that matter) could ever match that travel itinerary.

The largest problem people face when first using a network is

grasping all that's available. Even seasoned users find themselves

surprised when they discover a new service or feature that they'd

never known even existed. Once acquainted with the terminology and

sufficiently comfortable with making occasional mistakes, the

learning process will drastically speed up.

Domains

Getting where you want to go can often be one of the more difficult

aspects of using networks. The variety of ways that places are named

will probably leave a blank stare on your face at first. Don't fret;

there is a method to this apparent madness.

If someone were to ask for a home address, they would probably expect

a street, apartment, city, state, and zip code. That's all the

information the post office needs to deliver mail in a reasonably

speedy fashion. Likewise, computer addresses have a structure to

them. The general form is:

a person's email address on a computer: user@somewhere.domain

a computer's name: somewhere.domain

The user portion is usually the person's account name on the

system, though it doesn't have to be. somewhere.domain tells

you the name of a system or location, and what kind of organization it

is. The trailing domain is often one of the following:

com

Usually a company or other commercial institution or organization,

like Convex Computers (convex.com).

edu

An educational institution, e.g. New York University, named nyu.edu.

gov

A government site; for example, NASA is nasa.gov.

mil

A military site, like the Air Force (af.mil).

net

Gateways and other administrative hosts for a network (it does not

mean all of the hosts in a network). {The Matrix, 111. One such

gateway is near.net.}

org

This is a domain reserved for private organizations, who don't

comfortably fit in the other classes of domains. One example is the

Electronic Frontier Foundation named eff.org.

Each country also has its own top-level domain. For example, the

us domain includes each of the fifty states. Other countries

represented with domains include:

au Australia

ca Canada

fr France

uk The United Kingdom. These also have sub-domains of things like

ac.uk for academic sites and co.uk for commercial ones.

FQDN (Fully Qualified Domain Name)

The proper terminology for a site's domain name (somewhere.domain

above) is its Fully Qualified Domain Name (FQDN). It is usually

selected to give a clear indication of the site's organization or

sponsoring agent. For example, the Massachusetts Institute of

Technology's FQDN is mit.edu; similarly, Apple Computer's domain name

is apple.com. While such obvious names are usually the norm, there

are the occasional exceptions that are ambiguous enough to

mislead---like vt.edu, which on first impulse one might surmise is an

educational institution of some sort in Vermont; not so. It's

actually the domain name for Virginia Tech. In most cases it's

relatively easy to glean the meaning of a domain name---such

confusion is far from the norm.

Internet Numbers

Every single machine on the Internet has a unique address, {At least

one address, possibly two or even three---but we won't go into

that.} called its Internet number or IP Address. It's actually a

32-bit number, but is most commonly represented as four numbers

joined by periods (.), like 147.31.254.130. This is sometimes also

called a dotted quad; there are literally thousands of different

possible dotted quads. The ARPAnet (the mother to today's Internet)

originally only had the capacity to have up to 256 systems on it

because of the way each system was addressed. In the early eighties,

it became clear that things would fast outgrow such a small limit;

the 32-bit addressing method was born, freeing thousands of host

numbers.

Each piece of an Internet address (like 192) is called an ``octet,''

representing one of four sets of eight bits. The first two or three

pieces (e.g. 192.55.239) represent the network that a system is on,

called its subnet. For example, all of the computers for Wesleyan

University are in the subnet 129.133. They can have numbers like

129.133.10.10, 129.133.230.19, up to 65 thousand possible

combinations (possible computers).

IP addresses and domain names aren't assigned arbitrarily---that

would lead to unbelievable confusion. An application must be filed

with the Network Information Center (NIC), either electronically (to

hostmaster@nic.ddn.mil) or via regular mail.

Resolving Names and Numbers

Ok, computers can be referred to by either their FQDN or their

Internet address. How can one user be expected to remember them all?

They aren't. The Internet is designed so that one can use either

method. Since humans find it much more natural to deal with words

than numbers in most cases, the FQDN for each host is mapped to its

Internet number. Each domain is served by a computer within that

domain, which provides all of the necessary information to go from a

domain name to an IP address, and vice-versa. For example, when

someone refers to foosun.bar.com, the resolver knows that it should

ask the system foovax.bar.com about systems in bar.com. It asks what

Internet address foosun.bar.com has; if the name foosun.bar.com

really exists, foovax will send back its number. All of this

``magic'' happens behind the scenes.

Rarely will a user have to remember the Internet number of a site

(although often you'll catch yourself remembering an apparently

obscure number, simply because you've accessed the system

frequently). However, you will remember a substantial number of

FQDNs. It will eventually reach a point when you are able to make a

reasonably accurate guess at what domain name a certain college,

university, or company might have, given just their name.

The Networks

Internet

The Internet is a large ``network of networks.'' There is no

one network known as The Internet; rather, regional nets like SuraNet,

PrepNet, NearNet, et al., are all inter-connected

(nay, ``inter-networked'') together into one great living thing,

communicating at amazing speeds with the TCP/IP protocol. All

activity takes place in ``real-time.''

UUCP

The UUCP network is a loose association of systems all communicating

with the UUCP protocol. (UUCP stands for `Unix-to-Unix Copy

Program'.) It's based on two systems connecting to each other at

specified intervals, called polling, and executing any work

scheduled for either of them. Historically most UUCP was done with

Unix equipment, although the software's since been implemented on

other platforms (e.g. VMS). For example, the system oregano

polls the system basil once every two hours. If there's any

mail waiting for oregano, basil will send it at that time;

likewise, oregano will at that time send any jobs waiting for

basil.

BITNET

BITNET (the ``Because It's Time Network'') is comprised of systems

connected by point-to-point links, all running the NJE protocol.

It's continued to grow, but has found itself suffering at the hands of

the falling costs of Internet connections. Also, a number of mail

gateways are in place to reach users on other networks.

The Physical Connection

The actual connections between the various networks take a variety of

forms. The most prevalent for Internet links are 56k leased lines

(dedicated telephone lines carrying 56kilobit-per-second connections)

and T1 links (special phone lines with 1Mbps connections). Also

installed are T3 links, acting as backbones between major locations

to carry a massive 45Mbps load of traffic.

These links are paid for by each institution to a local carrier (for

example, Bell Atlantic owns PrepNet, the main provider in

Pennsylvania). Also available are SLIP connections, which carry

Internet traffic (packets) over high-speed modems.

UUCP links are made with modems (for the most part), that run from

1200 baud all the way up to as high as 38.4Kbps. As was mentioned in

The Networks, the connections are of the store-and-forward

variety. Also in use are Internet-based UUCP links (as if things

weren't already confusing enough!). The systems do their UUCP traffic

over TCP/IP connections, which give the UUCP-based network some

blindingly fast ``hops,'' resulting in better connectivity for the

network as a whole. UUCP connections first became popular in the

1970's, and have remained in wide-spread use ever since. Only with

UUCP can Joe Smith correspond with someone across the country or

around the world, for the price of a local telephone call.

BITNET links mostly take the form of 9600bps modems connected from site

to site. Often places have three or more links going; the majority,

however, look to ``upstream'' sites for their sole link to the network.

``The Glory and the Nothing of a Name''

Byron, {Churchill's Grave}

-----------

Electronic Mail

The desire to communicate is the essence of networking. People have

always wanted to correspond with each other in the fastest way

possible, short of normal conversation. Electronic mail (or

email) is the most prevalent application of this in computer

networking. It allows people to write back and forth without having

to spend much time worrying about how the message actually gets

delivered. As technology grows closer and closer to being a common

part of daily life, the need to understand the many ways it can be

utilized and how it works, at least to some level, is vital.

part of daily life (as has been evidenced by the ISDN effort, the need

to understand the many ways it can be utilized and how it works, at

least to some level, is vital.

Email Addresses

Electronic mail is hinged around the concept of an address; the

section on Networking Basics made some reference to it while

introducing domains. Your email address provides all of the

information required to get a message to you from anywhere in the

world. An address doesn't necessarily have to go to a human being.

It could be an archive server, {See Archive Servers, for a

description.} a list of people, or even someone's pocket pager.

These cases are the exception to the norm---mail to most addresses is

read by human beings.

%@!.: Symbolic Cacophony

Email addresses usually appear in one of two forms---using the

Internet format which contains @, an ``at''-sign, or using the

UUCP format which contains !, an exclamation point, also called

a ``bang.'' The latter of the two, UUCP ``bang'' paths, is more

restrictive, yet more clearly dictates how the mail will travel.

To reach Jim Morrison on the system south.america.org, one would

address the mail as jm@south.america.org. But if Jim's account was

on a UUCP site named brazil, then his address would be brazil!jm. If

it's possible (and one exists), try to use the Internet form of an

address; bang paths can fail if an intermediate site in the path

happens to be down. There is a growing trend for UUCP sites to

failures.

Another symbol that enters the fray is %---it acts as an extra

``routing'' method. For example, if the UUCP site dream is connected

to south.america.org, but doesn't have an Internet domain name of its

own, a user debbie on dream can be reached by writing to the address

not smallexample!

debbie%dream@south.america.org

The form is significant. This address says that the local system

should first send the mail to south.america.org. There the address

debbie%dream will turn into debbie@dream, which will hopefully be a

valid address. Then south.america.org will handle getting the mail

to the host dream, where it will be delivered locally to debbie.

All of the intricacies of email addressing methods are fully covered

in the book ``!%@@:: A Directory of Electronic Mail Addressing and

Networks'' published by O'Reilly and Associates, as part of their

Nutshell Handbook series. It is a must for any active email user.

Write to nuts@ora.com for ordering information.

Sending and Receiving Mail

We'll make one quick diversion from being OS-neuter here, to show you

what it will look like to send and receive a mail message on a Unix

system. Check with your system administrator for specific

instructions related to mail at your site.

A person sending the author mail would probably do something like this:

% mail brendan@cs.widener.edu

Subject: print job's stuck

I typed `print babe.gif' and it didn't work! Why??

The next time the author checked his mail, he would see it listed in

his mailbox as:

% mail

"/usr/spool/mail/brendan": 1 messages 1 new 1 unread

U 1 joeuser@foo.widene Tue May 5 20:36 29/956 print job's stuck

which gives information on the sender of the email, when it was sent,

and the subject of the message. He would probably use the

reply command of Unix mail to send this response:

? r

To: joeuser@@foo.widener.edu

Subject: Re: print job's stuck

You shouldn't print binary files like GIFs to a printer!

Brendan

Try sending yourself mail a few times, to get used to your system's

mailer. It'll save a lot of wasted aspirin for both you and your

system administrator.

Anatomy of a Mail Header

An electronic mail message has a specific structure to it that's

common across every type of computer system. {The standard is written

down in RFC-822. See also RFCs for more info on how to get copies of

the various RFCs.} A sample would be:

>From bush@hq.mil Sat May 25 17:06:01 1991

Received: from hq.mil by house.gov with SMTP id AA21901

(4.1/SMI for dan@house.gov); Sat, 25 May 91 17:05:56 -0400

Date: Sat, 25 May 91 17:05:56 -0400

From: The President <bush@hq.mil>

Message-Id: <9105252105.AA06631@hq.mil>

To: dan@senate.gov

Subject: Meeting

Hi Dan .. we have a meeting at 9:30 a.m. with the Joint Chiefs. Please

don't oversleep this time.

The first line, with From and the two lines for Received: are usually

not very interesting. They give the ``real'' address that the mail

is coming from (as opposed to the address you should reply to, which

may look much different), and what places the mail went through to

get to you. Over the Internet, there is always at least one

Received: header and usually no more than four or five. When a

message is sent using UUCP, one Received: header is added for each

system that the mail passes through. This can often result in more

than a dozen Received: headers. While they help with dissecting

problems in mail delivery, odds are the average user will never want

to see them. Most mail programs will filter out this kind of

``cruft'' in a header.

The Date: header contains the date and time the message was

sent. Likewise, the ``good'' address (as opposed to ``real'' address)

is laid out in the From: header. Sometimes it won't include

the full name of the person (in this case The President), and

may look different, but it should always contain an email address of

some form.

The Message-ID: of a message is intended mainly for tracing

mail routing, and is rarely of interest to normal users. Every

Message-ID: is guaranteed to be unique.

To: lists the email address (or addresses) of the recipients of

the message. There may be a Cc: header, listing additional

addresses. Finally, a brief subject for the message goes in the

Subject: header.

The exact order of a message's headers may vary from system to system,

but it will always include these fundamental headers that are vital to

proper delivery.

Bounced Mail

When an email address is incorrect in some way (the system's name is

wrong, the domain doesn't exist, whatever), the mail system will

bounce the message back to the sender, much the same way that the

Postal Service does when you send a letter to a bad street address.

The message will include the reason for the bounce; a common error is

addressing mail to an account name that doesn't exist. For example,

writing to Lisa Simpson at Widener University's Computer Science

department will fail, because she doesn't have an account. {Though if

she asked, we'd certainly give her one.}

From: Mail Delivery Subsystem <MAILER-DAEMON>

Date: Sat, 25 May 91 16:45:14 -0400

To: mg@gracie.com

Cc: Postmaster@cs.widener.edu

Subject: Returned mail: User unknown

----- Transcript of session follows -----

While talking to cs.widener.edu:

>>> RCPT To:<lsimpson@cs.widener.edu>

<<< 550 <lsimpson@cs.widener.edu>... User unknown

550 lsimpson... User unknown

As you can see, a carbon copy of the message (the Cc: header

entry) was sent to the postmaster of Widener's CS department. The

Postmaster is responsible for maintaining a reliable mail system

on his system. Usually postmasters at sites will attempt to aid you

in getting your mail where it's supposed to go. If a typing error was

made, then try re-sending the message. If you're sure that the

address is correct, contact the postmaster of the site directly and

ask him how to properly address it.

The message also includes the text of the mail, so you don't have to

retype everything you wrote.

----- Unsent message follows -----

Received: by cs.widener.edu id AA06528; Sat, 25 May 91 16:45:14 -0400

Date: Sat, 25 May 91 16:45:14 -0400

From: Matt Groening <mg@gracie.com>

Message-Id: <9105252045.AA06528@gracie.com>

To: lsimpson@cs.widener.edu

Subject: Scripting your future episodes

Reply-To: writing-group@gracie.com

.... verbiage ...

The full text of the message is returned intact, including any headers

that were added. This can be cut out with an editor and fed right

back into the mail system with a proper address, making redelivery a

relatively painless process.

Mailing Lists

People that share common interests are inclined to discuss their

hobby or interest at every available opportunity. One modern way to

aid in this exchange of information is by using a mailing

list---usually an email address that redistributes all mail sent to

it back out to a list of addresses. For example, the Sun Managers

mailing list (of interest to people that administer computers

manufactured by Sun) has the address sun-managers@eecs.nwu.edu. Any

mail sent to that address will ``explode'' out to each person named

in a file maintained on a computer at Northwestern University.

Administrative tasks (sometimes referred to as administrivia) are

often handled through other addresses, typically with the suffix

-request. To continue the above, a request to be added to or deleted

from the Sun Managers list should be sent to

sun-managers-request@eecs.nwu.edu.

When in doubt, try to write to the -request version of a mailing list

address first; the other people on the list aren't interested in your

desire to be added or deleted, and can certainly do nothing to

expedite your request. Often if the administrator of a list is busy

(remember, this is all peripheral to real jobs and real work), many

users find it necessary to ask again and again, often with harsher

and harsher language, to be removed from a list. This does nothing

more than waste traffic and bother everyone else receiving the

messages. If, after a reasonable amount of time, you still haven't

succeeded to be removed from a mailing list, write to the postmaster

at that site and see if they can help.

Exercise caution when replying to a message sent by a mailing list. If

you wish to respond to the author only, make sure that the only

address you're replying to is that person, and not the entire list.

Often messages of the sort ``Yes, I agree with you completely!'' will

appear on a list, boring the daylights out of the other readers. Likewise,

if you explicitly do want to send the message to the whole list,

you'll save yourself some time by checking to make sure it's indeed

headed to the whole list and not a single person.

A list of the currently available mailing lists is available in at

least two places; the first is in a file on ftp.nisc.sri.com called

interest-groups under the netinfo/ directory. It's updated fairly

regularly, but is large (presently around 700K), so only get it every

once in a while. The other list is maintained by Gene Spafford

(spaf@cs.purdue.edu), and is posted in parts to the newsgroup

news.lists semi-regularly. (Usenet News, for info on how to read that

and other newsgroups.)

Listservs

On BITNET there's an automated system for maintaining discussion lists

called the listserv. Rather than have an already harried and

overworked human take care of additions and removals from a list, a

program performs these and other tasks by responding to a set of

user-driven commands.

Areas of interest are wide and varied---ETHICS-L deals with ethics in

computing, while ADND-L has to do with a role-playing game. A full

list of the available BITNET lists can be obtained by writing to

LISTSERV@BITNIC.BITNET with a body containing the command

list global

However, be sparing in your use of this---see if it's already on your

system somewhere. The reply is quite large.

The most fundamental command is subscribe. It will tell the

listserv to add the sender to a specific list. The usage is

subscribe foo-l Your Real Name

It will respond with a message either saying that you've been added to

the list, or that the request has been passed on to the system on

which the list is actually maintained.

The mate to subscribe is, naturally, unsubscribe. It will remove a

given address from a BITNET list. It, along with all other listserv

commands, can be abbreviated---subscribe as sub, unsubscribe as

unsub, etc. For a full list of the available listserv commands,

write to LISTSERV@BITNIC.BITNET, giving it the command help.

As an aside, there have been implementations of the listserv system

for non-BITNET hosts (more specifically, Unix systems). One of the

most complete is available on cs.bu.edu in the

directory pub/listserv.

``I made this letter longer than usual because

I lack the time to make it shorter.''

Pascal, Provincial Letters XVI

--------------

Anonymous FTP

FTP (File Transfer Protocol) is the primary method of transferring

files over the Internet. On many systems, it's also the name of the

program that implements the protocol. Given proper permission, it's

possible to copy a file from a computer in South Africa to one in Los

Angeles at very fast speeds (on the order of 5--10K per second).

This normally requires either a user id on both systems or a special

configuration set up by the system administrator(s).

There is a good way around this restriction---the anonymous FTP

service. It essentially will let anyone in the world have access to

a certain area of disk space in a non-threatening way. With this,

people can make files publicly available with little hassle. Some

systems have dedicated entire disks or even entire computers to

maintaining extensive archives of source code and information. They

include gatekeeper.dec.com (Digital), wuarchive.wustl.edu (Washington

University in Saint Louis), and archive.cis.ohio-state.edu (The Ohio

State University).

The process involves the ``foreign'' user (someone not on the system

itself) creating an FTP connection and logging into the system as the

user anonymous, with an arbitrary password:

Name (foo.site.com:you): anonymous

Password: jm@south.america.org

Custom and netiquette dictate that people respond to the

Password: query with an email address so that the sites can

track the level of FTP usage, if they desire. (Addresses for

information on email addresses).

The speed of the transfer depends on the speed of the underlying

link. A site that has a 9600bps SLIP connection will not get the same

throughput as a system with a 56k leased line (The Physical

Connection, for more on what kinds of connections can exist in a

network). Also, the traffic of all other users on that link will

affect performance. If there are thirty people all FTPing from one

site simultaneously, the load on the system (in addition to the

network connection) will degrade the overall throughput of the

transfer.

FTP Etiquette

Lest we forget, the Internet is there for people to do work. People

using the network and the systems on it are doing so for a purpose,

whether it be research, development, whatever. Any heavy activity

takes away from the overall performance of the network as a whole.

The effects of an FTP connection on a site and its link can vary; the

general rule of thumb is that any extra traffic created detracts from

the ability of that site's users to perform their tasks. To help be

considerate of this, it's highly recommended that FTP sessions

be held only after normal business hours for that site, preferably

late at night. The possible effects of a large transfer will be less

destructive at 2 a.m. than 2 p.m. Also, remember that if it's past

dinner time in Maine, it's still early afternoon in California---think

in terms of the current time at the site that's being visited, not of

local time.

Basic Commands

While there have been many extensions to the various FTP clients out

there, there is a de facto ``standard'' set that everyone expects to

work. For more specific information, read the manual for your

specific FTP program. This section will only skim the bare minimum of

commands needed to operate an FTP session.

Creating the Connection

The actual command to use FTP will vary among operating systems; for

the sake of clarity, we'll use FTP here, since it's the most

general form.

There are two ways to connect to a system---using its hostname

or its Internet number. Using the hostname is usually preferred.

However, some sites aren't able to resolve hostnames properly,

and have no alternative. We'll assume you're able to use hostnames

for simplicity's sake. The form is

ftp somewhere.domain

Domains for help with reading and using domain names

(in the example below, somewhere.domain is ftp.uu.net).

You must first know the name of the system you want to connect to.

We'll use ftp.uu.net as an example. On your system, type:

ftp ftp.uu.net

(the actual syntax will vary depending on the type of system the

connection's being made from). It will pause momentarily then respond

with the message

Connected to ftp.uu.net.

and an initial prompt will appear:

220 uunet FTP server (Version 5.100 Mon Feb 11 17:13:28 EST 1991) ready.

Name (ftp.uu.net:jm):

to which you should respond with anonymous:

220 uunet FTP server (Version 5.100 Mon Feb 11 17:13:28 EST 1991) ready.

Name (ftp.uu.net:jm): anonymous

The system will then prompt you for a password; as noted previously, a

good response is your email address:

331 Guest login ok, send ident as password.

Password: jm@south.america.org

230 Guest login ok, access restrictions apply.

ftp>

The password itself will not echo. This is to protect a user's

security when he or she is using a real account to FTP files between

machines. Once you reach the ftp> prompt, you know you're

logged in and ready to go.

Notice the ftp.uu.net:joe in the Name: prompt? That's

another clue that anonymous FTP is special: FTP expects a normal user

accounts to be used for transfers.

dir

At the ftp> prompt, you can type a number of commands to perform

various functions. One example is dir---it will list the files

in the current directory. Continuing the example from above:

ftp> dir

200 PORT command successful.

150 Opening ASCII mode data connection for /bin/ls.

total 3116

drwxr-xr-x 2 7 21 512 Nov 21 1988 .forward

-rw-rw-r-- 1 7 11 0 Jun 23 1988 .hushlogin

drwxrwxr-x 2 0 21 512 Jun 4 1990 Census

drwxrwxr-x 2 0 120 512 Jan 8 09:36 ClariNet

... etc etc ...

-rw-rw-r-- 1 7 14 42390 May 20 02:24 newthisweek.Z

... etc etc ...

-rw-rw-r-- 1 7 14 2018887 May 21 01:01 uumap.tar.Z

drwxrwxr-x 2 7 6 1024 May 11 10:58 uunet-info

226 Transfer complete.

5414 bytes received in 1.1 seconds (4.9 Kbytes/s)

ftp>

The file newthisweek.Z was specifically included because we'll

be using it later. Just for general information, it happens to be a

listing of all of the files added to UUNET's archives during the past

week.

The directory shown is on a machine running the Unix operating

system---the dir command will produce different results on other

operating systems (e.g. TOPS, VMS, et al.). Learning to recognize

different formats will take some time. After a few weeks of

traversing the Internet, it proves easier to see, for example, how

large a file is on an operating system you're otherwise not acquainted

with.

With many FTP implementations, it's also possible to take the output

of dir and put it into a file on the local system with

ftp> dir n* outfilename

the contents of which can then be read outside of the live FTP

connection; this is particularly useful for systems with very long

directories (like ftp.uu.net). The above example would put the

names of every file that begins with an n into the local file

outfilename.

At the beginning of an FTP session, the user is in a ``top-level''

directory. Most things are in directories below it (e.g. /pub). To

change the current directory, one uses the cd command. To change to

the directory pub, for example, one would type

ftp> cd pub

which would elicit the response

250 CWD command successful.

Meaning the ``Change Working Directory'' command (cd) worked

properly. Moving ``up'' a directory is more system-specific---in Unix

use the command cd .., and in VMS, cd [-].

get and put

The actual transfer is performed with the get and put

commands. To get a file from the remote computer to the local

system, the command takes the form:

ftp> get filename

where filename is the file on the remote system. Again using

ftp.uu.net as an example, the file newthisweek.Z can be

retrieved with

ftp> get newthisweek.Z

200 PORT command successful.

150 Opening ASCII mode data connection for newthisweek.Z (42390 bytes).

226 Transfer complete.

local: newthisweek.Z remote: newthisweek.Z

42553 bytes received in 6.9 seconds (6 Kbytes/s)

ftp>

The section below on using binary mode instead of ASCII will describe

why this particular choice will result in a corrupt and subsequently

unusable file.

If, for some reason, you want to save a file under a different name

(e.g. your system can only have 14-character filenames, or can only

have one dot in the name), you can specify what the local filename

should be by providing get with an additional argument

ftp> get newthisweek.Z uunet-new

which will place the contents of the file newthisweek.Z in

uunet-new on the local system.

The transfer works the other way, too. The put command will

transfer a file from the local system to the remote system. If the

permissions are set up for an FTP session to write to a remote

directory, a file can be sent with

ftp> put filename

As with get, put will take a third argument, letting you

specify a different name for the file on the remote system.

ASCII vs Binary

In the example above, the file newthisweek.Z was transferred, but

supposedly not correctly. The reason is this: in a normal ASCII

transfer (the default), certain characters are translated between

systems, to help make text files more readable. However, when binary

files (those containing non-ASCII characters) are transferred, this

translation should not take place. One example is a binary

program---a few changed characters can render it completely useless.

To avoid this problem, it's possible to be in one of two modes---ASCII

or binary. In binary mode, the file isn't translated in any way.

What's on the remote system is precisely what's received. The

commands to go between the two modes are:

ftp> ascii

200 Type set to A. (Note the A, which signifies ASCII mode.)

ftp> binary

200 Type set to I. (Set to Image format, for pure binary transfers.)

Note that each command need only be done once to take effect; if the

user types binary, all transfers in that session are done in

binary mode (that is, unless ascii is typed later).

The transfer of newthisweek.Z will work if done as:

ftp> binary

200 Type set to I.

ftp> get newthisweek.Z

200 PORT command successful.

150 Opening BINARY mode data connection for newthisweek.Z (42390 bytes).

226 Transfer complete.

local: newthisweek.Z remote: newthisweek.Z

42390 bytes received in 7.2 seconds (5.8 Kbytes/s)

Note: The file size (42390) is different from that done

in ASCII mode (42553) bytes; and the number 42390 matches the one

in the listing of UUNET's top directory. We can be relatively sure

that we've received the file without any problems.

mget and mput

The commands mget and mput allow for multiple file

transfers using wildcards to get several files, or a whole set of

files at once, rather than having to do it manually one by one. For

example, to get all files that begin with the letter f, one

would type

ftp> mget f*

Similarly, to put all of the local files that end with .c:

ftp> mput *.c

Rather than reiterate what's been written a hundred times before,

consult a local manual for more information on wildcard matching

(every DOS manual, for example, has a section on it).

Normally, FTP assumes a user wants to be prompted for every file in a

mget or mput operation. You'll often need to get a whole set of

files and not have each of them confirmed---you know they're all

right. In that case, use the prompt command to turn the queries off.

ftp> prompt

Interactive mode off.

Likewise, to turn it back on, the prompt command should simply

be issued again.

Joe Granrose's List

Monthly, Joe Granrose (odin@pilot.njin.net) posts to Usenet

(Usenet News) an extensive list of sites offering anonymous FTP

service. It's available in a number of ways:

The Usenet groups comp.misc and comp.sources.wanted

Anonymous FTP from pilot.njin.net [128.6.7.38], in

/pub/ftp-list.

Write to odin@pilot.njin.net with a Subject: line of listserv-request

and a message body of send help. Please don't bother Joe with your

requests---the server will provide you with the list.

The archie Server

archie is always in lowercase

A group of people at McGill University in Canada got together and created a

query system called archie. It was originally formed to be a

quick and easy way to scan the offerings of the many anonymous FTP

sites that are maintained around the world. As time progressed,

archie grew to include other valuable services as well.

The archie service is accessible through an interactive telnet

session, email queries, and command-line and X-window clients. The

email responses can be used along with FTPmail servers for those not

on the Internet. (FTP-by-Mail Servers, for info on using FTPmail

servers.)

Using archie Today

Currently, archie tracks the contents of over 800 anonymous FTP

archive sites containing over a million files stored across the

Internet. Collectively, these files represent well over 50 gigabytes

of information, with new entries being added daily.

The archie server automatically updates the listing information from

each site about once a month. This avoids constantly updating the

databases, which could waste network resources, yet ensures that the

information on each site's holdings is reasonably up to date.

To access archie interactively, telnet to one of the existing

servers. {See Telnet, for notes on using the telnet program.} They

include

archie.ans.net (New York, USA)

archie.rutgers.edu (New Jersey, USA)

archie.sura.net (Maryland, USA)

archie.unl.edu (Nebraska, USA)

archie.mcgill.ca (the first Archie server, in Canada)

archie.funet.fi (Finland)

archie.au (Australia)

archie.doc.ic.ac.uk (Great Britain)

At the login: prompt of one of the servers, enter archie to log in.

A greeting will be displayed, detailing information about ongoing

work in the archie project; the user will be left at a archie>

prompt, at which he may enter commands. Using help will yield

instructions on using the prog command to make queries, set to

control various aspects of the server's operation, et al. Type quit

at the prompt to leave archie. Typing the query prog vine.tar.Z will

yield a list of the systems that offer the source to the X-windows

program vine; a piece of the information returned looks like:

Host ftp.uu.net (137.39.1.9)

Last updated 10:30 7 Jan 1992

Location: /packages/X/contrib

FILE rw-r--r-- 15548 Oct 8 20:29 vine.tar.Z

Host nic.funet.fi (128.214.6.100)

Last updated 05:07 4 Jan 1992

Location: /pub/X11/contrib

FILE rw-rw-r-- 15548 Nov 8 03:25 vine.tar.Z

archie Clients

There are two main-stream archie clients, one called (naturally

enough) archie, the other xarchie (for X-Windows). They query the

archie databases and yield a list of systems that have the requested

file(s) available for anonymous FTP, without requiring an interactive

session to the server. For example, to find the same information you

tried with the server command prog, you could type

% archie vine.tar.Z

Host athene.uni-paderborn.de

Location: /local/X11/more_contrib

FILE -rw-r--r-- 18854 Nov 15 1990 vine.tar.Z

Host emx.utexas.edu

Location: /pub/mnt/source/games

FILE -rw-r--r-- 12019 May 7 1988 vine.tar.Z

Host export.lcs.mit.edu

Location: /contrib

FILE -rw-r--r-- 15548 Oct 9 00:29 vine.tar.Z

Note that your system administrator may not have installed the archie

clients yet; the source is available on each of the archie servers, in

the directory archie/clients.

Using the X-windows client is much more intuitive---if it's installed,

just read its man page and give it a whirl. It's essential for the

networked desktop.

Mailing archie

Users limited to email connectivity to the Internet should send a

message to the address archie@archie.mcgill.ca with the single word

help in the body of the message. An email message will be returned

explaining how to use the email archie server, along with the details

of using FTPmail. Most of the commands offered by the telnet

interface can be used with the mail server.

The whatis database

In addition to offering access to anonymous FTP listings, archie also

permits access to the whatis description database. It includes

the names and brief synopses for over 3,500 public domain software

packages, datasets and informational documents located on the

Internet.

Additional whatis databases are scheduled to be added in the

future. Planned offerings include listings for the names and locations

of online library catalog programs, the names of publicly accessible

electronic mailing lists, compilations of Frequently Asked Questions

lists, and archive sites for the most popular Usenet newsgroups.

Suggestions for additional descriptions or locations databases are

welcomed and should be sent to the archie developers at

archie-l@cs.mcgill.ca.

``Was f@"ur pl@"undern!''

(``What a place to plunder!'')

Gebhard Leberecht Bl@"ucher

------

Usenet News

Original from: chip@count.tct.com (Chip Salzenberg)

[Most recent change: 19 May 1991 by spaf@cs.purdue.edu (Gene Spafford)]

The first thing to understand about Usenet is that it is widely

misunderstood. Every day on Usenet the ``blind men and the

elephant'' phenomenon appears, in spades. In the opinion of the

author, more flame wars (rabid arguments) arise because of a

lack of understanding of the nature of Usenet than from any other

source. And consider that such flame wars arise, of necessity, among

people who are on Usenet. Imagine, then, how poorly understood Usenet

must be by those outside!

No essay on the nature of Usenet can ignore the erroneous impressions

held by many Usenet users. Therefore, this section will treat

falsehoods first. Keep reading for truth. (Beauty, alas, is not

relevant to Usenet.)

What Usenet Is

Usenet is the set of machines that exchange articles tagged with one

or more universally-recognized labels, called newsgroups (or

``groups'' for short). (Note that the term newsgroup is correct,

while area, base, board, bboard, conference, round table, SIG, etc.

are incorrect. If you want to be understood, be accurate.)

The Diversity of Usenet

If the above definition of Usenet sounds vague, that's because it is.

It is almost impossible to generalize over all Usenet sites in any

non-trivial way. Usenet encompasses government agencies, large

universities, high schools, businesses of all sizes, home computers of

all descriptions, etc.

Every administrator controls his own site. No one has any real

control over any site but his own. The administrator gets his power

from the owner of the system he administers. As long as the owner is

happy with the job the administrator is doing, he can do whatever he

pleases, up to and including cutting off Usenet entirely. C'est

la vie.

What Usenet Is Not

Usenet is not an organization.

Usenet has no central authority. In fact, it has no central anything.

There is a vague notion of ``upstream'' and ``downstream'' related to

the direction of high-volume news flow. It follows that, to the

extent that ``upstream'' sites decide what traffic they will carry for

their ``downstream'' neighbors, that ``upstream'' sites have some

influence on their neighbors. But such influence is usually easy to

circumvent, and heavy-handed manipulation typically results in a

backlash of resentment.

Usenet is not a democracy.

A democracy can be loosely defined as ``government of the people, by

the people, for the people.'' However, as explained above, Usenet is

not an organization, and only an organization can be run as a

democracy. Even a democracy must be organized, for if it lacks a

means of enforcing the peoples' wishes, then it may as well not exist.

Some people wish that Usenet were a democracy. Many people pretend

that it is. Both groups are sadly deluded.

Usenet is not fair.

After all, who shall decide what's fair? For that matter, if someone

is behaving unfairly, who's going to stop him? Neither you nor I,

that's certain.

Usenet is not a right.

Some people misunderstand their local right of ``freedom of speech''

to mean that they have a legal right to use others' computers to say

what they wish in whatever way they wish, and the owners of said

computers have no right to stop them.

Those people are wrong. Freedom of speech also means freedom not to

speak; if I choose not to use my computer to aid your speech, that is

my right. Freedom of the press belongs to those who own one.

Usenet is not a public utility.

Some Usenet sites are publicly funded or subsidized. Most of them,

by plain count, are not. There is no government monopoly on Usenet,

and little or no control.

Usenet is not a commercial network.

Many Usenet sites are academic or government organizations; in fact,

Usenet originated in academia. Therefore, there is a Usenet custom of

keeping commercial traffic to a minimum. If such commercial traffic

is generally considered worth carrying, then it may be grudgingly

tolerated. Even so, it is usually separated somehow from

non-commercial traffic; see comp.newprod.

Usenet is not the Internet.

The Internet is a wide-ranging network, parts of which are subsidized

by various governments. The Internet carries many kinds of traffic;

Usenet is only one of them. And the Internet is only one of the

various networks carrying Usenet traffic.

Usenet is not a Unix network, nor even an ASCII network.

Don't assume that everyone is using ``rn'' on a Unix machine. There

are Vaxen running VMS, IBM mainframes, Amigas, and MS-DOS PCs reading

and posting to Usenet. And, yes, some of them use (shudder) EBCDIC.

Ignore them if you like, but they're out there.

Usenet is not software.

There are dozens of software packages used at various sites to

transport and read Usenet articles. So no one program or package can

be called ``the Usenet software.''

Software designed to support Usenet traffic can be (and is) used for

other kinds of communication, usually without risk of mixing the two.

Such private communication networks are typically kept distinct from

Usenet by the invention of newsgroup names different from the

universally-recognized ones.

Usenet is not a UUCP network.

UUCP is a protocol (some might say protocol suite, but that's a

technical point) for sending data over point-to-point connections,

typically using dialup modems. Usenet is only one of the various

kinds of traffic carried via UUCP, and UUCP is only one of the various

transports carrying Usenet traffic.

Well, enough negativity.

Propagation of News

In the old days, when UUCP over long-distance dialup lines was the

dominant means of article transmission, a few well-connected sites

had real influence in determining which newsgroups would be carried

where. Those sites called themselves ``the backbone.''

But things have changed. Nowadays, even the smallest Internet site

has connectivity the likes of which the backbone admin of yesteryear

could only dream. In addition, in the U.S., the advent of cheaper

long-distance calls and high-speed modems has made long-distance

Usenet feeds thinkable for smaller companies. There is only one

pre-eminent UUCP transport site today in the U.S., namely UUNET. But

UUNET isn't a player in the propagation wars, because it never

refuses any traffic---it gets paid by the minute, after all; to

refuse based on content would jeopardize its legal status as an

enhanced service provider.

All of the above applies to the U.S. In Europe, different cost

structures favored the creation of strictly controlled hierarchical

organizations with central registries. This is all very unlike the

traditional mode of U.S. sites (pick a name, get the software, get a

feed, you're on). Europe's ``benign monopolies'', long uncontested,

now face competition from looser organizations patterned after the

U.S. model.

Group Creation

As discussed above, Usenet is not a democracy. Nevertheless,

currently the most popular way to create a new newsgroup involves a

``vote'' to determine popular support for (and opposition to) a

proposed newsgroup. Newsgroup Creation, for detailed instructions and

guidelines on the process involved in making a newsgroup.

If you follow the guidelines, it is probable that your group will be

created and will be widely propagated. However, due to the nature of

Usenet, there is no way for any user to enforce the results of a

newsgroup vote (or any other decision, for that matter). Therefore,

for your new newsgroup to be propagated widely, you must not only

follow the letter of the guidelines; you must also follow its spirit.

And you must not allow even a whiff of shady dealings or dirty tricks

to mar the vote.

So, you may ask: How is a new user supposed to know anything about the

``spirit'' of the guidelines? Obviously, she can't. This fact leads

inexorably to the following recommendation:

If you're a new user, don't try to create a new newsgroup alone.

If you have a good newsgroup idea, then read the news.groups

newsgroup for a while (six months, at least) to find out how things

work. If you're too impatient to wait six months, then you really

need to learn; read news.groups for a year instead. If you just

can't wait, find a Usenet old hand to run the vote for you.

Readers may think this advice unnecessarily strict. Ignore it at your

peril. It is embarrassing to speak before learning. It is foolish to

jump into a society you don't understand with your mouth open. And it

is futile to try to force your will on people who can tune you out

with the press of a key.

If You're Unhappy...

Property rights being what they are, there is no higher authority on

Usenet than the people who own the machines on which Usenet traffic is

carried. If the owner of the machine you use says, ``We will not

carry alt.sex on this machine,'' and you are not happy with

that order, you have no Usenet recourse. What can we outsiders do,

after all?

That doesn't mean you are without options. Depending on the nature

of your site, you may have some internal political recourse. Or you

might find external pressure helpful. Or, with a minimal investment,

you can get a feed of your own from somewhere else. Computers capable

of taking Usenet feeds are down in the $500 range now, Unix-capable

boxes are going for under $2000, and there are at least two Unix

lookalikes in the $100 price range.

No matter what, appealing to ``Usenet'' won't help. Even if those who

read such an appeal regarding system administration are sympathetic to

your cause, they will almost certainly have even less influence at

your site than you do.

By the same token, if you don't like what some user at another site is

doing, only the administrator and/or owner of that site have any

authority to do anything about it. Persuade them that the user in

question is a problem for them, and they might do something (if they

feel like it). If the user in question is the administrator or owner

of the site from which he or she posts, forget it; you can't win.

Arrange for your newsreading software to ignore articles from him or

her if you can, and chalk one up to experience.

The History of Usenet (The ABCs)

In the beginning, there were conversations, and they were good. Then

came Usenet in 1979, shortly after the release of V7 Unix with UUCP;

and it was better. Two Duke University grad students in North

Carolina, Tom Truscott and Jim Ellis, thought of hooking computers

together to exchange information with the Unix community. Steve

Bellovin, a grad student at the University of North Carolina, put

together the first version of the news software using shell scripts

and installed it on the first two sites: unc and duke. At the

beginning of 1980 the network consisted of those two sites and phs

(another machine at Duke), and was described at the January 1980

Usenix conference in Boulder, CO. {The Usenix conferences are

semi-annual meetings where members of the Usenix Association, a

group of Unix enthusiasts, meet and trade notes.} Steve Bellovin

later rewrote the scripts into C programs, but they were never

released beyond unc and duke. Shortly thereafter, Steve Daniel did

another implementation in the C programming language for public

distribution. Tom Truscott made further modifications, and this

became the ``A'' news release.

In 1981 at the University of California at Berkeley, grad student Mark

Horton and high school student Matt Glickman rewrote the news software

to add functionality and to cope with the ever increasing volume of

news---``A'' news was intended for only a few articles per group per

day. This rewrite was the ``B'' news version. The first public

release was version 2.1 in 1982; all versions before 2.1 were

considered in beta test. As The Net grew, the news software was

expanded and modified. The last version maintained and released

primarily by Mark was 2.10.1.

Rick Adams, then at the Center for Seismic Studies, took over

coordination of the maintenance and enhancement of the news software

with the 2.10.2 release in 1984. By this time, the increasing volume

of news was becoming a concern, and the mechanism for moderated groups

was added to the software at 2.10.2. Moderated groups were inspired

by ARPA mailing lists and experience with other bulletin board

systems. In late 1986, version 2.11 of news was released, including a

number of changes to support a new naming structure for newsgroups,

enhanced batching and compression, enhanced ihave/sendme control

messages, and other features. The current release of news is 2.11,

patchlevel 19.

A new version of news, becoming known as ``C'' news, has been

developed at the University of Toronto by Geoff Collyer and Henry

Spencer. This version is a rewrite of the lowest levels of news to

increase article processing speed, decrease article expiration

processing and improve the reliability of the news system through

better locking, etc. The package was released to The Net in the

autumn of 1987. For more information, see the paper News Need Not Be

Slow, published in the Winter 1987 Usenix Technical Conference

proceedings.

Usenet software has also been ported to a number of platforms, from

the Amiga and IBM PCs all the way to minicomputers and mainframes.

Hierarchies

Newsgroups are organized according to their specific areas of

concentration. Since the groups are in a tree structure, the

various areas are called hierarchies. There are seven major categories:

comp

Topics of interest to both computer professionals and

hobbyists, including topics in computer science, software sources, and

information on hardware and software systems.

misc

Group addressing themes not easily classified into any of the other

headings or which incorporate themes from multiple categories.

Subjects include fitness, job-hunting, law, and investments.

sci

Discussions marked by special knowledge relating to research in or

application of the established sciences.

soc

Groups primarily addressing social issues and socializing. Included

are discussions related to many different world cultures.

talk

Groups largely debate-oriented and tending to feature long

discussions without resolution and without appreciable amounts of

generally useful information.

news

Groups concerned with the news network, group maintenance, and software.

rec

Groups oriented towards hobbies and recreational activities

These ``world'' newsgroups are (usually) circulated around the entire

Usenet---this implies world-wide distribution. Not all groups

actually enjoy such wide distribution, however. The European Usenet

and Eunet sites take only a selected subset of the more ``technical''

groups, and controversial ``noise'' groups are often not carried by many

sites in the U.S. and Canada (these groups are primarily under the talk

and soc classifications). Many sites do not carry some or all of

the comp.binaries groups because of the typically large size of

the posts in them (being actual executable programs).

Also available are a number of ``alternative'' hierarchies:

alt

True anarchy; anything and everything can and does appear;

subjects include sex, the Simpsons, and privacy.

gnu

Groups concentrating on interests and software with the GNU

Project of the Free Software Foundation. For further info on what the

FSF is, FSF.

biz

Business-related groups.

Moderated vs Unmoderated

Some newsgroups insist that the discussion remain focused and

on-target; to serve this need, moderated groups came to be. All

articles posted to a moderated group get mailed to the group's

moderator. He or she periodically (hopefully sooner than later)

reviews the posts, and then either posts them individually to Usenet,

or posts a composite digest of the articles for the past day or

two. This is how many mailing list gateways work (for example, the

Risks Digest).

news.groups & news.announce.newgroups

Being a good net.citizen includes being involved in the continuing

growth and evolution of the Usenet system. One part of this

involvement includes following the discussion in the groups

news.groups and the notes in news.announce.newgroups. It is there

that discussion goes on about the creation of new groups and

destruction of inactive ones. Every person on Usenet is allowed and

encouraged to vote on the creation of a newsgroup.

How Usenet Works

The transmission of Usenet news is entirely cooperative. Feeds are

generally provided out of good will and the desire to distribute news

everywhere. There are places which provide feeds for a fee (e.g.

UUNET), but for the large part no exchange of money is involved.

There are two major transport methods, UUCP and NNTP. The first is

mainly modem-based and involves the normal charges for telephone

calls. The second, NNTP, is the primary method for distributing news

over the Internet.

With UUCP, news is stored in batches on a site until the

neighbor calls to receive the articles, or the feed site happens to

call. A list of groups which the neighbor wishes to receive is

maintained on the feed site. The Cnews system compresses its batches,

which can dramatically reduce the transmission time necessary for a

relatively heavy newsfeed.

NNTP, on the other hand, offers a little more latitude with how news

is sent. The traditional store-and-forward method is, of course,

available. Given the ``real-time'' nature of the Internet, though,

other methods have been devised. Programs now keep constant

connections with their news neighbors, sending news nearly

instantaneously, and can handle dozens of simultaneous feeds, both

incoming and outgoing.

The transmission of a Usenet article is centered around the unique

Message-ID: header. When an NNTP site offers an article to a

neighbor, it says it has that specific Message ID. If the neighbor

finds it hasn't received the article yet, it tells the feed to send it

through; this is repeated for each and every article that's waiting

for the neighbor. Using unique IDs helps prevent a system from

receiving five copies of an article from each of its five news

neighbors, for example.

Further information on how Usenet works with relation to the various

transports is available in the documentation for the Cnews and NNTP

packages, as well as in RFC-1036, the Standard for Interchange of

USENET Messages and RFC-977, Network News Transfer Protocol: A

Proposed Standard for the Stream-Based Transmission of News. The

RFCs do tend to be rather dry reading, particularly to the new user.

Mail Gateways

A natural progression is for Usenet news and electronic mailing lists

to somehow become merged---which they have, in the form of news

gateways. Many mailing lists are set up to ``reflect'' messages not

only to the readership of the list, but also into a newsgroup.

Likewise, posts to a newsgroup can be sent to the moderator of the

mailing list, or to the entire mailing list. Some examples of this in

action are comp.risks (the Risks Digest) and

comp.dcom.telecom (the Telecom Digest).

This method of propagating mailing list traffic has helped solve the

problem of a single message being delivered to a number of people at

the same site---instead, anyone can just subscribe to the group.

Also, mailing list maintenance is lowered substantially, since the

moderators don't have to be constantly removing and adding users to

and from the list. Instead, the people can read and not read the

newsgroup at their leisure.

from ``Dear Emily Postnews'' by Brad Templeton

Usenet ``Netiquette''

There are many traditions with Usenet, not the least of which is

dubbed netiquette---being polite and considerate of others. If

you follow a few basic guidelines, you, and everyone that reads your

posts, will be much happier in the long run.

Signatures

At the end of most articles is a small blurb called a person's

signature. In Unix this file is named .signature in the

person's login directory---it will vary for other operating systems.

It exists to provide information about how to get in touch with the

person posting the article, including their email address, phone

number, address, or where they're located. Even so, signatures have

become the graffiti of computers. People put song lyrics, pictures,

philosophical quotes, even advertisements in their ``.sigs''.

(Note, however, that advertising in your signature will more often

than not get you flamed until you take it out.)

Four lines will suffice---more is just extra garbage for Usenet sites

to carry along with your article, which is supposed to be the intended

focus of the reader. Netiquette dictates limiting oneself to this

``quota'' of four---some people make signatures that are ten lines or

even more, including elaborate ASCII drawings of their hand-written

signature or faces or even the space shuttle. This is not

cute, and will bother people to no end.

Similarly, it's not necessary to include your signature---if you

forget to append it to an article, don't worry about it. The

article's just as good as it ever would be, and contains everything

you should want to say. Don't re-post the article just to include the

signature.

Posting Personal Messages

If mail to a person doesn't make it through, avoid posting the message

to a newsgroup. Even if the likelihood of that person reading the

group is very high, all of the other people reading the articles don't

give a whit what you have to say to Jim Morrison. Simply wait for the

person to post again and double-check the address, or get in touch

with your system administrator and see if it's a problem with local

email delivery. It may also turn out that their site is down or is

having problems, in which case it's just necessary to wait until

things return to normal before contacting Jim.

Posting Mail

In the interests of privacy, it's considered extremely bad taste to post

any email that someone may have sent, unless they explicitly give you

permission to redistribute it. While the legal issues can be heavily

debated, most everyone agrees that email should be treated as anything

one would receive via normal snailmail, {The slang for the normal land and air

postal service.} , with all of the assumed rights that are carried with it.

Test Messages

Many people, particularly new users, want to try out posting before

actually taking part in discussions. Often the mechanics of getting

messages out is the most difficult part of Usenet. To this end,

many, many users find it necessary to post their tests to ``normal''

groups (for example, news.admin or comp.mail.misc). This is

considered a major netiquette faux pas in the Usenet world. There are

a number of groups available, called test groups, that exist solely

for the purpose of trying out a news system, reader, or even new

signature. They include

alt.test

gnu.gnusenet.test

misc.test

some of which will generate auto-magic replies to your posts to

let you know they made it through. There are certain denizens of

Usenet that frequent the test groups to help new users out. They

respond to the posts, often including the article so the poster can

see how it got to the person's site. Also, many regional hierarchies

have test groups, like phl.test in Philadelphia.

By all means, experiment and test---just do it in its proper place.

Famous People Appearing

Every once in a while, someone says that a celebrity is accessible

through ``The Net''; or, even more entertaining, an article is forged

to appear to be coming from that celebrity. One example is Stephen

Spielberg---the rec.arts.movies readership was in an uproar for

two weeks following a couple of posts supposedly made by Mr.

Spielberg. (Some detective work revealed it to be a hoax.)

There are a few well-known people that are acquainted with

Usenet and computers in general---but the overwhelming majority are

just normal people. One should act with skepticism whenever a notable

personality is ``seen'' in a newsgroup.

Summaries

Authors of articles occasionally say that readers should reply by

mail and they'll summarize. Accordingly, readers should do just

that---reply via mail. Responding with a followup article to such an

article defeats the intention of the author. She, in a few days,

will post one article containing the highlights of the responses she

received. By following up to the whole group, the author may not

read what you have to say.

When creating a summary of the replies to a post, try to make it as

reader-friendly as possible. Avoid just putting all of the messages

received into one big file. Rather, take some time and edit the

messages into a form that contains the essential information that

Recent News

One should avoid posting ``recent'' events---sports scores, a plane

crash, or whatever people will see on the evening news or read in the

morning paper. By the time the article has propagated across all of

Usenet, the ``news'' value of the article will have become stale.

(This is one case for the argument that Usenet news is a misnomer.

{Note that the Clarinet News service (Clarinet) offers news items in

a Usenet format as a precise alternative to the morning paper, et.

al.)

Quality of Postings

How you write and present yourself in your articles is important. If

you have terrible spelling, keep a dictionary near by. If you have

trouble with grammar and punctuation, try to get a book on English

grammar and composition (found in many bookstores and at garage

sales). By all means pay attention to what you say---it makes you who

you are on The Net.

Likewise, try to be clear in what you ask. Ambiguous or vague

questions often lead to no response at all, leaving the poster

discouraged. Give as much essential information as you feel is

necessary to let people help you, but keep it within limits. For

instance, you should probably include the operating system of your

computer in the post if it's needed, but don't tell everybody what

peripherals you have hanging off of it.

Useful Subjects

The Subject: line of an article is what will first attract

people to read it---if it's vague or doesn't describe what's contained

within, no one will read the article. At the same time,

Subject: lines that're too wordy tend to be irritating. For

example:

Good

Subject: Building Emacs on a Sun Sparc under 4.1

Good

Subject: Tryin' to find Waldo in NJ.

Bad

Subject: I can't get emacs to work !!!

Bad

Subject: I'm desperately in search of the honorable Mr. Waldo in the state

of...

Simply put, try to think of what will best help the reader when he or

she encounters your article in a newsreading session.

Tone of Voice

Since common computers can't portray the inflection or tone in a

person's voice, how articles are worded can directly affect the

response to them. If you say

Anybody using a Vic-20 should go buy themselves a life.

you'll definitely get some responses---telling you to take a leap.

Rather than be inflammatory, phrase your articles in a way that

rationally expresses your opinion, like

What're the practical uses of a Vic-20 these days?

which presents yourself as a much more level-headed individual.

Also, what case (upper or lower) you use can indicate how you're

trying to speak---netiquette dictates that if you USE ALL CAPITAL

LETTERS, people will think you're ``shouting.'' Write as you would in

a normal letter to a friend, following traditional rules of English

(or whatever language you happen to speak).

Computer Religion

No matter what kind of computer a person is using, theirs is always

the best and most efficient of them all. Posting articles

asking questions like What computer should I buy? An Atari ST or an

Amiga? will lead only to fervent arguments over the merits and

drawbacks of each brand. Don't even ask The Net---go to a local user

group, or do some research of your own like reading some magazine

reviews. Trying to say one computer is somehow better than another is

a moot point.

The Anatomy of an Article

Frequently Asked Questions

A number of groups include Frequently Asked Question (FAQ) lists,

which give the answers to questions or points that have been raised

time and time again in a newsgroup. They're intended to help cut

down on the redundant traffic in a group. For example, in the

newsgroup alt.tv.simpsons, one recurring question is Did you notice

that there's a different blackboard opening at the beginning of every

Simpsons episode? As a result, it's part of the FAQ for that group.

Usually, FAQ lists are posted at the beginning of each month, and are

set to expire one month later (when, supposedly, the next FAQ will be

published). Nearly every FAQ is also crossposted to news.answers,

which is used as a Usenet repository for them.

The Pit-Manager Archive

MIT, with Jonathan Kamens, has graciously dedicated a machine to the

archiving and storage of the various periodic postings that are

peppered throughout the various Usenet groups. To access them, FTP to

the system pit-manager.mit.edu and look in the directory

/pub/usenet.

``Be it true or false, so it be news.''

Ben Jonson, News from the New World

-----

Telnet

Telnet is the main Internet protocol for creating a connection

with a remote machine. It gives the user the opportunity to be on one

computer system and do work on another, which may be across the street

or thousands of miles away. Where modems are limited, in the majority,

by the quality of telephone lines and a single connection, telnet

provides a connection that's error-free and nearly always faster than

the latest conventional modems.

Using Telnet

As with FTP (Anonymous FTP), the actual command for negotiating a telnet

connection varies from system to system. The most common is

telnet itself, though. It takes the form of:

telnet somewhere.domain

To be safe, we'll use your local system as a working example. By now,

you hopefully know your site's domain name. If not, ask or try

to figure it out. You'll not get by without it.

To open the connection, type

telnet your.system.name

If the system were wubba.cs.widener.edu, for example, the

command would look like

telnet wubba.cs.widener.edu

The system will respond with something similar to

Trying 147.31.254.999...

Connected to wubba.cs.widener.edu.

Escape character is '^]'.

The escape character, in this example ^] (Control-]), is the

character that will let you go back to the local system to close the

connection, suspend it, etc. To close this connection, the user

would type ^], and respond to the telnet> prompt with the command

close. Local documentation should be checked for information on

specific commands, functions, and escape character that can be used.

Telnet Ports

Many telnet clients also include a third option, the port on

which the connection should take place. Normally, port 23 is the

default telnet port; the user never has to think about it. But

sometimes it's desirable to telnet to a different port on a system,

where there may be a service available, or to aid in debugging a

problem. Using

telnet somewhere.domain port

will connect the user to the given port on the system

somewhere.domain. Many libraries use this port method to offer their

facilities to the general Internet community; other services are also

available. For instance, one would type

telnet martini.eecs.umich.edu 3000

to connect to the geographic server at the University of Michigan

(Geographic Server). Other such port connections follow the

same usage.

Publicly Accessible Libraries

Over the last several years, most university libraries have switched

from a manual (card) catalog system to computerized library catalogs.

The automated systems provide users with easily accessible and

up-to-date information about the books available in these libraries.

This has been further improved upon with the advent of local area

networks, dialup modems, and wide area networks. Now many of us can

check on our local library's holdings or that of a library halfway

around the world!

Many, many institutions of higher learning have made their library

catalogs available for searching by anyone on the Internet. They

include Boston University, the Colorado Alliance of Research Libraries

(CARL), and London University King's College.

To include a listing of some of the existing sites would not only be

far too long for this document, it would soon be out of date.

Instead, several lists are being maintained and are available either

by mail or via FTP. Also, the Internet Resource Guide (IRG) also

describes a few libraries that are accessible---IRG for further

information.

Art St. George and Ron Larsen are maintaining a list of

Internet-accessible libraries and databases often referred to as

``the St. George directory.'' It began with only library catalogs

but has expanded to include sections on campus-wide information

systems, and even bulletin board systems that are not on the

Internet. The library catalog sections are divided into those that

are free, those that charge, and international (i.e. non-U.S.)

catalogs; they are arranged by state, province, or country within

each section. There is also a section giving dialup information for

some of the library catalogs. It's available for FTP (Anonymous FTP)

on nic.cerf.net in the directory

cerfnet/cerfnet_info/library_catalog. The file internet-catalogs has

a date suffix; check for the most current date. The information is

updated periodically.

Billy Barron, Systems Manager at the University of North Texas,

produces a directory as an aid to his user community. It complements

the St. George guide by providing a standard format for all systems

which lists the Internet address, login instructions, the system

vendor, and logoff information. The arrangement is alphabetic by

organization name. It's available for FTP on vaxb.acs.unt.edu in the

subdirectory library as the file libraries.txt.

For announcements of new libraries being available and discussion on

related topics, consult the Usenet newsgroup

comp.internet.library (Usenet News to learn how to read

news).

Bulletin Board Systems

The Cleveland Freenet

Freenets are open-access, free, community computer systems. One such

system is the Cleveland Freenet, sponsored by CWRU (Case Western

Reserve University). Anyone and everyone is welcome to join and take

part in the exciting project---that of a National Telecomputing Public

Network, where everyone benefits. There's no charge for the

registration process and no charge to use the system.

To register, telnet to any one of

freenet-in-a.cwru.edu

freenet-in-b.cwru.edu

freenet-in-c.cwru.edu

After you're connected, choose the entry on the menu that signifies

you're a guest user. Another menu will follow; select Apply for

an account, and you'll be well on your way to being a FreeNet member.

You will need to fill out a form and send it to them through the

Postal Service---your login id and password will be created in a few

days. At that point you're free to use the system as you wish. They

provide multi-user chat, email, Usenet news, and a variety of other

things to keep you occupied for hours on end.

Directories

There are a few systems that are maintained to provide the Internet

community with access to lists of information---users, organizations,

etc. They range from fully dedicated computers with access to papers

and research results, to a system to find out about the faculty

members of a university.

Knowbot

Knowbot is a ``master directory'' that contains email address

information from the NIC WHOIS database (Whois), the PSI White

Pages Pilot Project, the NYSERNET X.500 database and MCI Mail. Most

of these services are email registries themselves, but Knowbot

provides a very comfortable way to access all of them in one place.

Telnet to nri.reston.va.us on port 185.

White Pages

PSI maintains a directory of information on individuals. It will

list the person's name, organization, and email address if it is

given. Telnet to wp.psi.net and log in as fred. The White Pages

Project also includes an interface to use Xwindows remotely.

Faculty and Staff Listings

Many universities offer access to information on current faculty and

staff. Included are:

Cornell Telnet to cuinfo.cornell.edu on port 3000.

NC State Telnet to ccvax1.cc.ncsu.edu and log in as info.

Rutgers Telnet to hangout.rutgers.edu on port 98.

U of Maryland Telnet to umail.umd.edu and log in as lookup.

UNC Chapel Hill Telnet to info.acs.unc.edu and log in as info.

Yale Telnet to yalevm.ycc.yale.edu on port 300.

Databases

For information on database services, Commercial Databases.

Not all databases on the Internet require payment for use, though.

There do exist some, largely research-driven databases, which are

publicly accessible. New ones spring up regularly.

To find out more about the databases in this section, contact the

people directly responsible for them. Their areas of concentration

and the software used to implement them are widely disparate, and are

probably beyond the author's expertise. Also, don't forget to check

with your local library---the reference librarian there can provide

information on conventional resources, and possibly even those

available over the Internet (they are becoming more common).

Colorado Alliance of Research Libraries (CARL)

The Colorado Alliance of Research Libraries (CARL), in association

with CARL Systems Inc., operates a public access catalog of services.

Offered are a number of library databases, including searches for

government periodicals, book reviews, indices for current articles,

and access to to other library databases around the country. Other

services are available to CARL members including an online

encyclopedia. Telnet to pac.carl.org, or write to help@carl.org for

more details.

PENpages

PENpages is an agriculturally-oriented database administered by

Pennsylvania State University. Information entered into PENpages is

provided by numerous sources including the Pennsylvania Dept. of

Agriculture, Rutgers University, and Penn State. Easy-to-use menus

guide users to information ranging from cattle and agricultural

prices to current weather information, from health information to

agricultural news from around the nation. A keyword search option

also allows users to search the database for related information and

articles. The database is updated daily, and a listing of most

recent additions is displayed after login. Telnet to psupen.psu.edu

and log in as the user PNOTPA.

Clemson Univ. Forestry & Agricultural Network

Clemson maintains a database similar to PENpages in content, but the

information provided tends to be localized to the Southeastern United

States. A menu-driven database offers queries involving the weather,

food, family, and human resources. Telnet to eureka.clemson.edu and

VT terminal).

University of Maryland Info Database

The Computer Science department of the University of Maryland

maintains a repository of information on a wide variety of topics.

They wish to give a working example of how network technology can

(and should) provide as much information as possible to those who use

it. Telnet to info.umd.edu and log in as info. The information

contained in the database is accessible through a screen-oriented

interface, and everything therein is available via anonymous FTP.

There is a mailing list used to discuss the UMD Info Database,

welcoming suggestions for new information, comments on the interface

the system provides, and other related topics. Send mail to

listserv@umdd.umd.edu with a body of

subscribe INFO-L Your Full Name

Listservs for more information on using the Listserv system.

University of Michigan Weather Underground

The University of Michigan's Department of Atmospheric, Oceanic, &

Space Sciences maintains a database of weather and related

information for the United States and Canada. Available are current

weather conditions and forecasts for cities in the U.S., a national

weather summary, ski conditions, earthquake and hurricane updates,

and a listing of severe weather conditions. Telnet to

madlab.sprl.umich.edu on port 3000 to use the system.

Geographic Name Server

A geographic database listing information for cities in the United

States and some international locations is maintained by Merit, Inc.

The database is searchable by city name, zip code, etc. It will

respond with a lot of information: the area code,

elevation, time zone, and longitude and latitude are included. For

example, a query of 19013 yields

0 Chester

1 42045 Delaware

2 PA Pennsylvania

3 US United States

F 45 Populated place

L 39 50 58 N 75 21 22 W

P 45794

E 22

Z 19013

Z 19014

Z 19015

Z 19016

To use the server, telnet to martini.eecs.umich.edu on port

3000. The command help will yield further instructions, along

with an explanation for each of the fields in a reponse.

FEDIX---Minority Scholarship Information

FEDIX is an on-line information service that links the higher

education community and the federal government to facilitate research,

education, and services. The system provides accurate and timely

federal agency information to colleges, universities, and other

research organizations. There are no registration fees and no access

charges for FEDIX whatsoever.

FEDIX offers the Minority On-Line Information Service (MOLIS), a

database listing current information about Black and Hispanic colleges

and universities.

Daily information updates are made on federal education and research

programs, scholarships, fellowships, and grants, available used

research equipment, and general information about FEDIX itself. To

access the database, telnet to fedix.fie.com and log in as

fedix.

Science & Technology Information System

The STIS is maintained by the National Science Foundation (NSF), and

provides access to many NSF publications. The full text of

publications can be searched online and copied from the system, which

can accommodate up to ten users at one time. Telnet to stis.nsf.gov

and log in as public. Everything on the system is also available via

anonymous FTP. For further information, contact:

STIS, Office of Information Systems, Room 401

National Science Foundation

1800 G. Street, N.W.

Washington, D.C. 20550

stis-request@nsf.gov

(202) 357-7492

(202) 357-7663 (Fax)

Ocean Network Information Center

The University of Delaware College of Marine Studies offers access to

an interactive database of research information covering all aspects

of marine studies, nicknamed OCEANIC. This includes the World Oceanic

Circulation Experiment (WOCE) information and program information,

research ship schedules and information, and a Who's Who of email and

mailing addresses for oceanic studies. Data from a variety of

academic institutions based on research studies is also available.

Telnet to delocn.udel.edu and log in as INFO.

NASA/IPAC Extragalactic Database (NED)

The NASA/IPAC Extragalactic Database (NED) is an ongoing project,

funded by NASA, to make data and literature on extragalactic objects

available over computer networks. NED is an object-oriented database

which contains extensive information for nearly 132,000 extragalactic

objects taken from about major catalogs of galaxies, quasars, infrared

and radio sources. NED provides positions, names, and other basic

data (e.g. magnitude types, sizes and redshifts as well as

bibliographic references and abstracts). Searches can be done by

name, around a name, and on an astronomical position. NED contains a

tutorial which guides the user through the retrieval process. Telnet

to ipac.caltech.edu and log in as ned.

U.S. Naval Observatory Automated Data Service

Operated by the U.S. Naval Observatory in Washington, D.C., this

automated data service provides database access to information

ranging from current navigational satellite positioning, astronomical

data, and software utilities. A wide variety of databases can be

searched and instructions for file transfer are given. Telnet to

tycho.usno.navy.mil and log in as ads.

``My consciousness suddenly switched locations, for the first time in

my life, from the vicinity of my head and body to a point about

twenty feet away from where I normally see the world.'' Howard

Rheingold, Virtual Reality p255

-----------------

Various Tools

New and interesting ways to use the Internet are being dreamed up

every day. As they gain wide-spread use, some methods become

near-standard (or actual written standard) tools for Internet users to

take advantage of. A few are detailed here; there are undoubtedly

others, and new ideas spring up all the time. An active user of the

Internet will discover most of the more common ones in time. Usually,

these services are free. Commercial Services for applications

that are commercially available over the Internet.

Usenet is often used to announce a new service or capability on

the Internet. In particular, the groups comp.archives and

comp.protocols.tcp-ip are good places to look. Information

will drift into other areas as word spreads. Usenet News for

information on reading news.

Finger

On many systems there exists the finger command, which yield

information about each user that's currently logged in. This command

also has extensions for use over the Internet, as well. Under normal

circumstances, the command is simply finger for a summary of who's

logged into the local system, or finger username for specific

information about a user. It's also possible to go one step further

and go onto the network. The general usage is

finger @hostname

To see who's currently logged in at Widener University, for instance, use

% finger @cs.widener.edu

[cs.widener.edu]

brendan Brendan Kehoe p0 Fri 02:14 tattoo.cs.widene

sven Sven Heinicke p1 Fri 04:16 xyplex3.cs.widen

To find out about a certain user, they can be fingered specifically

(and need not be logged in):

% finger bart@cs.widener.edu

[cs.widener.edu]

Directory: /home/springfield/bart Shell: /bin/underachiever

Affiliation: Brother of Lisa Home System: channel29.fox.org

Last login Thu May 23 12:14 (EDT) on ttyp6 from channel29.fox.org.

No unread mail

Project: To become a "fluff" cartoon character.

Plan:

Don't have a cow, man.

Please realize that some sites are very security conscious, and need

to restrict the information about their systems and users available

to the outside world. To that end, they often block finger requests

from outside sites---so don't be surprised if fingering a computer or

a user returns with Connection refused.

Internet Relay Chat

The Lamont View Server System

On lamont.ldgo.columbia.edu in pub/gb.tar.Z.

Ping

The ping command allows the user to check if another system is

currently ``up'' and running. The general form of the command

is ping system. {The usage will, again, vary.}

For example,

ping cs.widener.edu

will tell you if the main machine in Widener University's Computer

Science lab is currently online (we certainly hope so!).

Many implementations of ping also include an option to let you

see how fast a link is running (to give you some idea of the load on

the network). For example:

% ping -s cs.swarthmore.edu

PING cs.swarthmore.edu: 56 data bytes

64 bytes from 130.58.68.1: icmp_seq=0 ttl=251 time=66 ms

64 bytes from 130.58.68.1: icmp_seq=1 ttl=251 time=45 ms

64 bytes from 130.58.68.1: icmp_seq=2 ttl=251 time=46 ms

--- cs.swarthmore.edu ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

round-trip min/avg/max = 45/52/66 ms

This case tells us that for cs.swarthmore.edu it takes about 46

milliseconds for a packet to go from Widener to Swarthmore College and

back again. It also gives the average and worst-case speeds, and any

packet loss that may have occurred (e.g. because of network

congestion).

While ping generally doesn't hurt network performance, you

shouldn't use it too often---usually once or twice will leave

you relatively sure of the other system's state.

Talk

Sometimes email is clumsy and difficult to manage when one really

needs to have an interactive conversation. The Internet provides for

that as well, in the form of talk. Two users can literally see

each other type across thousands of miles.

To talk with Bart Simpson at Widener, one would type

talk bart@@cs.widener.edu

which would cause a message similar to the following to be displayed

on Bart's terminal:

Message from Talk_Daemon@cs.widener.edu at 21:45 ...

talk: connection requested by joe@ee.someplace.edu

talk: respond with: talk joe@ee.someplace.edu

Bart would, presumably, respond by typing talk joe@ee.someplace.edu.

They could then chat about whatever they wished, with instantaneous

response time, rather than the write-and-wait style of email. To

leave talk, on many systems one would type Ctrl-C (hold down

the Control key and press C). Check local documentation to be sure.

There are two different versions of talk in common use today. The

first, dubbed ``old talk,'' is supported by a set of Unix systems

(most notably, those currently sold by Sun). The second, ntalk

(aka ``new talk''), is more of the standard. If, when attempting to

talk with another user, it responds with an error about protocol

families, odds are the incompatibilities between versions of talk is

the culprit. It's up to the system administrators of sites which use

the old talk to install ntalk for their users.

Wide Area Information Servers (WAIS)

The WHOIS Database

The main WHOIS database is run at the Network Information Center

(NIC). The whois command will let you search a database of every

registered domain (e.g. mit.edu) and of registered users. It's

primarily used by system postmasters or listowners to find the Points

of Contact for a site, to let them know of a problem or contact them

for one reason or another. You can also find out their postal

address. For example:

% whois mit.edu

Massachusetts Institute of Technology (MIT) MIT.EDU 18.72.2.1

Massachusetts Institute of Technology (MIT-DOM) MIT.EDU

Note that there are two entries for mit.edu; we'll go for the

second.

% whois mit-dom

Massachusetts Institute of Technology (MIT-DOM)

Cambridge, MA 02139

Domain Name: MIT.EDU

Administrative Contact, Technical Contact, Zone Contact:

Schiller, Jeffrey I. (JIS) JIS@MIT.EDU

(617) 253-8400

Record last updated on 22-Jun-88.

Domain servers in listed order:

STRAWB.MIT.EDU 18.71.0.151

W20NS.MIT.EDU 18.70.0.160

BITSY.MIT.EDU 18.72.0.3

LITHIUM.LCS.MIT.EDU 18.26.0.121

To see this host record with registered users, repeat the command with

a star ('*') before the name; or, use '%' to show JUST the registered users.

Much better! Now this information (sought, possibly, by a system

administrator) can be used to find out how to notify MIT of a security

issue or problem with connectivity.

Queries can be made for individuals as well; the following would yield

an entry for the author:

% whois brendan

Kehoe, Brendan (BK59) brendan@cs.widener.edu

Widener University

Department of Computer Science

Kirkbride 219

P.O. Box 83 Widener University

Chester, PA 19013

(215)/499-4011

Record last updated on 02-May-91.

Included is the author's name, his handle (a unique sequence of letters

and numbers), information on how to contact him, and the last time the record

was modified in any way.

Anyone can register with the whois database. People who are

administrative or technical contacts for domains are registered

automatically when their domain applications are processed. For

normal users, one must simply fill out a form from the NIC. FTP to

nic.ddn.mil and get the file netinfo/user-template.txt. The completed

form should be mailed to registrar@nic.ddn.mil.

Other Uses of WHOIS

Also, many educational sites run WHOIS servers of their own, to offer

information about people who may be currently on the staff or

attending the institution. To specify a WHOIS server, many

implementations include some sort of option or qualifier---in VMS

under MultiNet, it's /HOST, in Unix -h. To receive

information about using the Stanford server, one might use the command

whois -h stanford.edu help

A large list of systems offering WHOIS services is being maintained by

Matt Power of MIT (mhpower@stan.mit.edu). It is available via

anonymous FTP from sipb.mit.edu, in the directory

pub/whois. The file is named whois-servers.list.

The systems available include, but are certainly not limited to,

Syracuse University (syr.edu), New York University

(acfcluster.nyu.edu), the University of California at San Diego

(ucsd.edu), and Stanford University (stanford.edu).

``Fingers were made before forks.''

Jonathan Swift, Polite Conversation

-------

Commercial Services

Many services can be accessed through the Internet. As time

progresses and more outlets for commercial activity appear,

once-restricted traffic (by the NSFnet Acceptable Use Policy) may now

flow freely. Now that there are other networks for that information

to travel on, businesses are making their move.

Internet Service Providers

Providers (AlterNet, PSI, etc)...

Supercomputers

The Internet Resource Guide (IRG) contains a chapter on

computer time that's available for a fee. Rather than reproduce it

here, which would fast become out-of-date as well as triple the size

of this guide, it's suggested that the reader consult the IRG if such

services are of interest.

Electronic Journals

The Association of Research Libraries (ARL) publishes a hard-copy

directory of electronic journals, newsletters, and scholarly

discussion lists. It is a compilation of entries for hundreds of

sts, dozens of journals and newsletters, and a many

``other'' titles, including newsletter-digests, into one reference

source. Each entry includes instructions on how to access the

referenced publication or list.

The documents are available electronically by sending the commands

get ejournl1 directry

get ejournl2 directry

to the server at LISTSERV@OTTAWA.BITNET.

Listservs for further instructions on using a listserv.

The directory, along with a compilation by Diane Kovacs called

Directories of Academic E-Mail Conferences, is available in

print and on diskette (DOS WordPerfect and MacWord) from:

Office of Scientific & Academic Publishing

Association of Research Libraries

1527 New Hampshire Avenue, NW

Washington, DC 20036

ARLHQ@UMDC.BITNET

(202) 232--2466

(202) 462--7849 (Fax)

The ARL is a not-for-profit organization representing over one

hundred research libraries in the United States and Canada. The

publication is available to ARL members for $10 and to non-members

for $20 (add $5 postage per directory for foreign addresses). Orders

of six or more copies will receive a 10% discount; all orders must be

prepaid and sent to the ARL.

Commercial Databases

The American Institute of Physics maintains the Physics Information

Network. It contains the bibliographic SPIN and General Physics

Advanced Abstracts databases. Also available is access to bulletin

boards and several searchable lists (job notices, announcements, etc).

Telnet to pinet.aip.org; new users must log in as NEW

and give registration information.

Some of the databases accessible through WAIS (WAIS) are

available for a fee.

Clarinet News

Clarinet's an electronic publishing network service that provides

professional news and information, including live UPI wireservice

news, in the Usenet file format.

Clarinet lets you read an ``electronic newspaper'' right on the local

system; you can get timely industry news, technology related

wirestories, syndicated columns and features, financial information,

stock quotes and more.

Clarinet's provided by using the Usenet message interchange format,

and is available via UUCP and other delivery protocols, including

NNTP.

The main feature is ClariNews, an ``electronic newspaper,''

gathered live from the wire services of United Press International

(UPI). ClariNews articles are distributed in 100 newsgroups based on

their subject matter, and are keyworded for additional topics and the

geographical location of the story. ClariNews includes headlines,

industry news, box scores, network TV schedules, and more. The main

products of ClariNews are:

ClariNews General, the general news``paper'' with news,

sports, and features, averaging about 400 stories per day.

TechWire, special groups for stories on science,

technology, and industry stories around them.

ClariNews-Biz, business and financial stories.

Newsbytes, a daily computer industry newsmagazine.

Syndicated Columns, including Dave Barry (humor) and Mike

Royko (opinion).

Full information on ClariNet, including subscription information, is

available from

Clarinet Communications Corp.

124 King St. North

Waterloo, Ontario N2J 2X8

info@@clarinet.com

(800) USE-NETS

or with anonymous FTP in the directory /Clarinet on

ftp.uu.net (Anonymous FTP).

``Needless to say, Aristotle did not envisage modern finance.''

Frederick Copleston, S.J.

A History of Philosophy: Vol 1 Greece & Rome Part II, p95

---------

Things You'll Hear About

There are certain things that you'll hear about shortly after you

start actively using the Internet. Most people assume that everyone's

familiar with them, and they require no additional explanation. If

only that were true!

This section addresses a few topics that are commonly encountered and

asked about as a new user explores Cyberspace. Some of them are

directly related to how the networks are run today; other points are

simply interesting to read about.

The Internet Worm

from a letter by Severo M. Ornstein, in ACM June 89 Vol32 No6

and the appeal notice

On November 2, 1988, Robert Morris, Jr., a graduate student in

Computer Science at Cornell, wrote an experimental, self-replicating,

self-propagating program called a worm and injected it into the

Internet. He chose to release it from MIT, to disguise the fact that

the worm came from Cornell. Morris soon discovered that the program

was replicating and reinfecting machines at a much faster rate than

he had anticipated---there was a bug. Ultimately, many machines at

locations around the country either crashed or became ``catatonic.''

When Morris realized what was happening, he contacted a friend at

Harvard to discuss a solution. Eventually, they sent an anonymous

message from Harvard over the network, instructing programmers how to

kill the worm and prevent reinfection. However, because the network

route was clogged, this message did not get through until it was too

late. Computers were affected at many sites, including universities,

military sites, and medical research facilities. The estimated cost

of dealing with the worm at each installation ranged from $200 to

more than $53,000. {Derived in part from a letter by Severo M.

Ornstein, in the Communications of the ACM, Vol 32 No 6, June 1989.}

The program took advantage of a hole in the debug mode of the Unix

sendmail program, which runs on a system and waits for other systems

to connect to it and give it email, and a hole in the finger daemon

fingerd, which serves finger requests (Finger). People at the

University of California at Berkeley and MIT had copies of the

program and were actively disassembling it (returning the program

back into its source form) to try to figure out how it worked.

Teams of programmers worked non-stop to come up with at least a

temporary fix, to prevent the continued spread of the worm. After

about twelve hours, the team at Berkeley came up with steps that

would help retard the spread of the virus. Another method was also

discovered at Purdue and widely published. The information didn't

get out as quickly as it could have, however, since so many sites had

completely disconnected themselves from the network.

After a few days, things slowly began to return to normalcy and

everyone wanted to know who had done it all. Morris was later named

in The New York Times as the author (though this hadn't yet been

officially proven, there was a substantial body of evidence pointing

to Morris).

Robert T. Morris was convicted of violating the computer Fraud and

Abuse Act (Title 18), and sentenced to three years of probation, 400

hours of community service, a fine of $10,050, and the costs of his

supervision. His appeal, filed in December, 1990, was rejected the

following March.

The Cuckoo's Egg

First in an article entitled ``Stalking the Wily Hacker,'' and later

in the book The Cuckoo's Egg, Clifford Stoll detailed his experiences

trying to track down someone breaking into a system at Lawrence

Berkeley Laboratory in California. {See the bibliography for full

citations.}

A 75-cent discrepancy in the Lab's accounting records led Stoll on a

chase through California, Virginia, and Europe to end up in a small

apartment in Hannover, West Germany. Stoll dealt with many levels of

bureaucracy and red tape, and worked with the FBI, the CIA, and the

German Bundespost trying to track his hacker down.

The experiences of Stoll, and particularly his message in speaking

engagements, have all pointed out the dire need for communication

between parties on a network of networks. The only way everyone can

peacefully co-exist in Cyberspace is by ensuring rapid recognition of

any existing problems.

Organizations

The indomitable need for humans to congregate and share their common

interests is also present in the computing world. User groups

exist around the world, where people share ideas and experiences.

Similarly, there are organizations which are one step ``above'' user

groups; that is to say, they exist to encourage or promote an idea or

set of ideas, rather than support a specific computer or application

of computers.

The Association for Computing Machinery

The Association for Computing Machinery (the ACM) was founded in

1947, immediately after Eckert and Mauchly unveiled one of the first

electronic computers, the ENIAC, in 1946. Since then, the ACM has

grown by leaps and bounds, becoming one of the leading educational

and scientific societies in the computer industry.

The ACM's stated purposes are:

To advance the sciences and arts of information processing;

To promote the free interchange of information about the sciences and

arts of information processing both among specialists and among the

public;

To develop and maintain the integrity and competence of individuals

engaged in the practices of the sciences and arts of information

processing.

Membership in the ACM has grown from seventy-eight in September, 1947,

to over 77,000 today. There are local chapters around the world, and

many colleges and universities endorse student chapters. Lecturers

frequent these meetings, which tend to be one step above the normal

``user group'' gathering. A large variety of published material is

also available at discounted prices for members of the association.

The ACM has a number of Special Interest Groups (SIGs) that

concentrate on a certain area of computing, ranging from graphics to

the Ada programming language to security. Each of the SIGs also

publishes its own newsletter. There is a Usenet group, comp.org.acm,

for the discussion of ACM topics. Usenet News for more information

on reading news.

For more information and a membership application, write to:

Assocation for Computing Machinery

1515 Broadway

New York City, NY 10036

ACMHELP@ACMVM.BITNET

(212) 869-7440

Computer Professionals for Social Responsibility

from their letter to prospective members

The CPSR is an alliance of computer professionals concentrating on

certain areas of the impact of computer technology on society. It

traces its history to the fall of 1981, when several researchers in

Palo Alto, California, organized a lunch meeting to discuss their

shared concerns about the connection between computing and the

nuclear arms race. Out of that meeting and the discussions which

followed, CPSR was born, and has been active ever since. {This

section is part of the CPSR's letter to prospective members.}

The national CPSR program focuses on the following project areas:

Reliability and Risk This area reflects on the concern that

overreliance on computing technology can lead to unacceptable risks

to society. It includes, but isn't limited to, work in analyzing

military systems such as SDI.

Civil Liberties and Privacy This project is concerned with such

topics as the FBI National Crime Information Center, the growing use

of databases by both government and private industry, the right of

access to public information, extension of First Amendment rights to

electronic communication, and establishing legal protections for

privacy of computerized information.

Computers in the Workplace The CPSR Workplace Project has

concentrated its attention on the design of software for the

workplace, and particularly on the philosophy of ``participatory

design,'' in which software designers work together with users to

ensure that systems meet the actual needs of that workplace.

The 21st Century Project This is a coalition with other

professional organizations working towards redirecting national

research priorities from concentrating on military issues to

anticipating and dealing with future problems as science and

technology enter the next century.

For more information on the CPSR, contact them at:

Computer Professionals for Social Responsibility

P.O. Box 717

Palo Alto, CA 94302

cpsr@csli.stanford.edu

(415) 322--3778

(415) 322--3798 (Fax)

The Electronic Frontier Foundation

The Electronic Frontier Foundation (EFF) was established to help

civilize the ``electronic frontier''---the Cyberspacial medium

becoming ever-present in today's society; to make it truly useful and

beneficial not just to a technical elite, but to everyone; and to do

this in a way which is in keeping with the society's highest

traditions of the free and open flow of information and

communication. {This section was derived from eff.about, available

along with other material via anonymous FTP from ftp.eff.org}

The mission of the EFF is to engage in and support educational

activities which increase popular understanding of the opportunities

and challenges posed by developments in computing and

telecommunications;

to develop among policy-makers a better understanding of the

issues underlying free and open telecommunications, and support the

creation of legal and structural approaches which will ease the

assimilation of these new technologies by society;

to raise public awareness about civil liberties issues arising from

the rapid advancement in the area of new computer-based

communications media and, where necessary, support litigation in the

public interest to preserve, protect, and extend First Amendment

rights within the realm of computing and telecommunications

technology;

to encourage and support the development of new tools which will

endow non-technical users with full and easy access to computer-based

telecommunications;

The Usenet newsgroups comp.org.eff.talk and comp.org.eff.news are

dedicated to discussion concerning the EFF. They also have mailing

list counterparts for those that don't have access to Usenet,

eff-talk-request@eff.org and eff-news-request@eff.org. The first is

an informal arena (aka a normal newsgroup) where anyone may voice his

or her opinions. The second, comp.org.eff.news, is a moderated area

for regular postings from the EFF in the form of EFFector Online. To

submit a posting for the EFFector Online, or to get general

information about the EFF, write to eff@eff.org. There is also a

wealth of information available via anonymous FTP on ftp.eff.org.

The EFF can be contacted at

The Electronic Frontier Foundation, Inc.

155 Second St. #1

Cambridge, MA 02141

eff@eff.org

(617) 864-0665

(617) 864-0866 (Fax)

The Free Software Foundation

The Free Software Foundation was started by Richard Stallman (creator

of the popular GNU Emacs editor). It is dedicated to eliminating

restrictions on copying, redistributing, and modifying software.

The word ``free'' in their name does not refer to price; it refers to

freedom. First, the freedom to copy a program and redistribute it to

your neighbors, so that they can use it as well as you. Second, the

freedom to change a program, so that you can control it instead of it

controlling you; for this, the source code must be made available to

you.

The Foundation works to provide these freedoms by developing free

compatible replacements for proprietary software. Specifically, they

are putting together a complete, integrated software system called

``GNU'' that is upward-compatible with Unix. {As an aside, the editor

of the GNU project, emacs, contains a built-in LISP interpreter and a

large part of its functionality is written in LISP. The name GNU is

itself recursive (the mainstay of the LISP language); it stands for

``Gnu's Not Unix.''}

When it is released, everyone will be permitted to copy it and

distribute it to others. In addition, it will be distributed with

source code, so you will be able to learn about operating systems by

reading it, to port it to your own machine, and to exchange the

changes with others.

For more information on the Free Software Foundation and the status of

the GNU Project, or for a list of the current tasks that still need to

be done, write to gnu@prep.ai.mit.edu.

The IEEE

Need IEEE...

The League for Programming Freedom

The League for Programming Freedom is a grass-roots organization of

professors, students, businessmen, programmers and users dedicated to

``bringing back'' the freedom to write programs, which they contend

has been lost over the past number years. The League is not opposed

to the legal system that Congress intended--copyright on individual

programs. Their aim is to reverse the recent changes made by judges in

response to special interests, often explicitly rejecting the public

interest principles of the Constitution.

The League works to abolish the new monopolies by publishing articles,

talking with public officials, boycotting egregious offenders, and in

the future may intervene in court cases. On May 24, 1989, the League

picketed Lotus headquarters because of their lawsuits, and then

again on August 2, 1990. These marches stimulated widespread media

coverage for the issue. They welcome suggestions for other

activities, as well as help in carrying them out.

For information on the League and how to join, write to

League for Programming Freedom

1 Kendall Square #143

P.O. Box 9171

Cambridge, MA 02139

league@prep.ai.mit.edu

Networking Initiatives

Research and development are two buzz words often heard when

discussing the networking field---everything needs to go faster, over

longer distances, for a lower cost. To ``keep current,'' one should

read the various trade magazines and newspapers, or frequent the

networking-oriented newsgroups of Usenet. If possible, attend trade

shows and symposia like Usenix, Interop, et. al.

ISDN

NREN

The National Research and Education Network (NREN) is a five-year

project approved by Congress in the Fall of 1991. It's intended to

create a national electronic ``super-highway.'' The NREN will be 50

times faster than the fastest available networks (at the time of this

writing). Proponents of the NREN claim it will be possible to

transfer the equivalent of the entire text of the Encyclopedia

Britannica in one second. Further information, including the

original text of the bill presented by Senator Al Gore (D--TN), is

available through anonymous FTP to nis.nsf.net, in the directory

nsfnet. In addition, Vint Cerf wrote on the then-proposed NREN in

RFC-1167, Thoughts on the National Research and Education Network.

RFCs for information on obtaining RFCs.

A mailing list, nren-discuss@uu.psi.com, is available for

discussion of the NREN; write to

nren-discuss-request@uu.psi.com to be added.

``To talk in publick, to think in solitude,

to read and to hear, to inquire,

and to answer inquiries, is the business of a scholar.''

Samuel Johnson

Chapter VIII

The History of Rasselas, Prince of Abissinia

-----

Finding Out More

Internet Resource Guide

The NSF Network Service Center (NNSC) compiles and makes available an

Internet Resource Guide (IRG). The goal of the guide is to increase the

visibility of various Internet resources that may help users do their

work better. While not yet an exhaustive list, the guide is a useful

compendium of many resources and can be a helpful reference for a new

user.

Resources listed are grouped by types into sections. Current sections

include descriptions of online library catalogs, data archives, online

white pages directory services, networks, network information centers,

and computational resources, such as supercomputers. Each entry

describes the resource, identifies who can use the resource, explains

how to reach the local network via the Internet, and lists contacts

for more information. The list is distributed electronically by the

NNSC. To receive a guide, or to get on a mailing list that alerts you

to when it is updated, send a message to

resource-guide-request@nnsc.nsf.net.

The current edition of the IRG is available via anonymous FTP from

nnsc.nsf.net, in the directory /resource-guide.

Requests for Comments

The internal workings of the Internet are defined by a set of

documents called RFCs (Request for Comments). The general process

for creating an RFC is for someone wanting something formalized to

write a document describing the issue and mailing it to Jon Postel

(postel@isi.edu). He acts as a referee for the proposal. It is then

commented upon by all those wishing to take part in the discussion

(electronically, of course). It may go through multiple revisions.

Should it be generally accepted as a good idea, it will be assigned a

number and filed with the RFCs.

The RFCs can be divided into five groups: required, suggested,

directional, informational and obsolete. Required RFCs (e.g.,

RFC-791, The Internet Protocol) must be implemented on any host

connected to the Internet.

Suggested RFCs are generally implemented by network hosts. Lack of

them does not preclude access to the Internet, but may impact its

usability. RFC-793, Transmission Control Protocol, is a must for

those implementing TCP.

Directional RFCs were discussed and agreed to, but their application

has never come into wide use. This may be due to the lack of wide

need for the specific application (RFC-937, The Post Office Protocol) or

that, although technically superior, ran against other pervasive

approaches (RFC-891, Hello). It is suggested that, should the facility

be required by a particular site, an implementation be done in

accordance with the RFC. This ensures that, should the idea be one

whose time has come, the implementation will be in accordance with

some standard and will be generally usable.

Informational RFCs contain factual information about the Internet and

its operation (RFC-990, Assigned Numbers).

There is also a subset of RFCs called FYIs (For Your Information).

They are written in a language much more informal than that used in

the other, standard RFCs. Topics range from answers to common

questions for new and experienced users to a suggested bibliography.

Finally, as the Internet has grown and technology has changed, some

RFCs become unnecessary. These obsolete RFCs cannot be ignored,

however. Frequently when a change is made to some RFC that causes a

new one to obsolete others, the new RFC only contains explanations and

motivations for the change. Understanding the model on which the

whole facility is based may involve reading the original and

subsequent RFCs on the topic.

RFCs and FYIs are available via FTP from many sources, including:

The nic.ddn.mil archive, as /rfc/rfc-xxxx.txt, where

xxxx is the number of the RFC.

from ftp.uu.net, in the directory /RFC.

They're also available through mail by writing to

service@nic.ddn.mil, with a Subject: line of send RFC-xxxx.TXT, again

with xxxx being the RFC number.

``Knowledge is of two kinds. We know a subject ourselves, or we

know where we can find information upon it.''

Samuel Johnson

Letter to Lord Chesterfield

February, 1755

a book of quotes said April 18, 1775 .. the book of Johnson's works

said it's 1755; I'll go with the latter.

-------

Conclusion

This guide is far from complete---the Internet changes on a daily (if

not hourly) basis. However, this booklet should provide enough

information to make the incredible breadth and complexity of the

Internet a mite less imposing. Coupled with some exploration and

experimentation, every user has the potential to be a competent net

citizen, using the facilities that are available to their fullest.

You, the reader, are strongly encouraged to suggest improvements to

any part of this booklet. If something was unclear, left you with

doubts, or wasn't addressed, it should be fixed. If you find any

problems, inaccuracies, spelling errors, etc., please report them to:

Brendan Kehoe

Department of Computer Science

Widener University

Chester, PA 19013

Internet: guide-bugs@cs.widener.edu

UUCP: ...!widener!guide-bugs

If you are interested in future updates to this guide (aside from

normal new editions), discussion about information to be included or

removed, etc., write to guide-request@cs.widener.edu to be placed on

a mailing list for such things.

@dots is actually `. . . .'

``I've seed de first an de last @dots I seed de beginnin,

en now I sees de endin.''

William Faulkner

The Sound & The Fury

April 8, 1928

--------

Getting to Other Networks

Inter-connectivity has been and always will be one of the biggest

goals in computer networking. The ultimate desire is to make it so

one person can contact anyone else no matter where they are. A number

of ``gateways'' between networks have been set up. They include:

AppleLink

Quantum Services sells access to AppleLink, which is similar to

QuantumLink for Commodore computers and PCLink for IBM PCs and

compatibles. It also provides email access through the address

user@applelink.apple.com.

ATTMail

AT&T sells a commercial email service called ATTMail. Its users

can be reached by writing to user@attmail.com.

BIX

Users on BIX (the Byte Information eXchange) can be reached

through the DAS gateway at user@cibix.das.net.

CompuServe (CI$)

To reach a user on the commercial service CompuServe, you must

address the mail as xxxxx.xxx@compuserve.com, with

xxxxx.xxx being their CompuServe user ID. Normally CompuServe

ids are represented as being separated by a comma (like

71999,141); since most mailers don't react well to having

commas in addresses, it was changed to a period. For the above

address, mail would be sent to 71999.141@compuserve.com.

EasyNet

Digital sells a service called EasyNet; users that subscribe to it can

be reached with the addresses user@host.enet.dec.com or

user%host.enet@decwrl.dec.com.

FidoNet

The FidoNet computer network can be reached by using a special

addressing method. If John Smith is on the node 1:2/3.4 on

FidoNet, his or her email address would be

john.smith@p4.f3.n2.z1.fidonet.org

(notice how the numbers fall in place?).

MCI Mail

MCI also sells email accounts (similar to ATTMail). Users can be

reached with user@mcimail.com.

PeaceNet

Users on the PeaceNet network can be reached by writing to

user@igc.org.

The Well

Users on the service The Well can be reached by writing to

user@well.sf.ca.us. The Well is directly connected to the Internet.

This table is far from complete. In addition to sites not being

listed, some services are not (nor do they plan to be) accessible

from the ``outside'' (like Prodigy); others, like GEnie, are actively

investigating the possibility of creating a gateway into their

system. For the latest information, consult a list called the

Inter-Network Mail Guide. It's available from a number of FTP sites,

including UUNET; Anonymous FTP, for more information on getting a

copy of it using anonymous FTP.

Retrieving Files via Email

For those who have a connection to the Internet, but cannot FTP, there

do exist a few alternatives to get those files you so desperately

need. When requesting files, it's imperative that you keep in mind

the size of your request---odds are the other people who may be using

your link won't be too receptive to sudden bursts of really heavy

traffic on their normally sedate connection.

Archive Servers

An alternative to the currently well over-used FTPmail system is

taking advantage of the many archive servers that are presently

being maintained. These are programs that receive email messages that

contain commands, and act on them. For example, sending an archive

server the command help will usually yield, in the form of a

piece of email, information on how to use the various commands that

the server has available.

One such archive server is service@nic.ddn.mil. Maintained by

the Network Information Center (NIC) in Chantilly, VA, the server is

set up to make all of the information at the NIC available for people

who don't have access to FTP. This also includes the WHOIS service

(Whois). Some sample Subject: lines for queries to the

NIC server are:

Subject: help Describes available commands.

Subject: rfc 822 Sends a copy of RFC-822.

Subject: rfc index Sends an index of the available RFCs.

Subject: netinfo domain-template.txt Sends a domain application.

Subject: whois widener Sends WHOIS information on `widener'.

More information on using their archive server can be obtained by

writing to their server address service@nic.ddn.mil with a

Subject: of help.

There are different ``brands'' of archive server, each with its own

set of commands and services. Among them there often exists a common

set of commands and services (e.g. index, help, etc).

Be that as it may, one should always consult the individual help for a

specific server before assuming the syntax---100K surprises can be

hard on a system.

FTP-by-Mail Servers

Some systems offer people the ability to receive files through a

mock-FTP interface via email. Anonymous FTP for a general overview of

how to FTP. The effects of providing such a service varies, although

a rule of thumb is that it will probably use a substantial amount of

the available resources on a system.

The ``original'' FTP-by-Mail service, BITFTP, is available to BITNET

users from the Princeton node PUCC. It was once accessible to

anyone, but had to be closed out to non-BITNET users because of the

heavy load on the system.

In response to this closure, Paul Vixie designed and installed a

system called FTPmail on one of Digital's gateway computers,

decwrl.dec.com. Write to ftpmail@decwrl.dec.com with help in the

body of the letter for instructions on its use. The software is

undergoing constant development; once it reaches a stable state,

other sites will be encouraged to adopt it and provide the service

also.

Newsgroup Creation

Everyone has the opportunity to make a Call For Votes on the

Usenet and attempt to create a newsgroup that he/she feels would be of

benefit to the general readership. The rules governing newsgroup

creation have evolved over the years into a generally accepted method.

They only govern the ``world'' groups; they aren't applicable to

regional or other alternative hierarchies.

Discussion

A discussion must first take place to address issues like the naming

of the group, where in the group tree it should go (e.g.

rec.sports.koosh vs rec.games.koosh?), and whether or not it should

be created in the first place. The formal Request For Discussion

(RFD) should be posted to news.announce.newgroups, along with any

other groups or mailing lists at all related to the proposed topic.

news.announce.newgroups is moderated. You should place it first in

the Newsgroups: header, so that it will get mailed to the moderator

only. The article won't be immediately posted to the other

newsgroups listed; rather, it will give you the opportunity to have

the moderator correct any inconsistencies or mistakes in your RFD.

He or she will take care of posting it to the newsgroups you

indicated. Also the Followup-To: header will be set so that the

actual discussion takes place only in news.groups. If a user has

difficulty posting to a moderated group, he or she may mail

submissions intended for news.announce.newgroups to the address

announce-newgroups@rpi.edu.

The final name and charter of the group, and whether it will be

moderated or unmoderated, will be determined during the discussion

period. If it's to be moderated, the discussion will also decide who

the moderator will be. If there's no general agreement on these

points among those in favor of a new group at the end of 30 days,

the discussion will be taken into mail rather than continued posting

to news.groups; that way, the proponents of the group can iron out

their differences and come back with a proper proposal, and make

a new Request For Discussion.

Voting

After the discussion period (which is mandatory), if it's been

determined that a new group really is desired, a name and charter are

agreed upon, and it's been determined whether the group will be

moderated (and by whom), a Call For Votes (CFV) should be posted

to news.announce.newgroups, along with any other groups that

the original Request For Discussion was posted to. The CFV should be

posted (or mailed to the news.announce.newgroups moderator) as

soon as possible after the discussion ends (to keep it fresh in

everyone's mind).

The Call for Votes should include clear instructions on how to cast a

vote. It's important that it be clearly explained how to both vote

for and against a group (and be of equivalent difficulty or

ease). If it's easier for you or your administrator, two separate

addresses can be used to mail yes and no votes to, providing that

they're on the same machine. Regardless of the method, everyone

must have a very specific idea of how to get his/her vote counted.

The voting period can last between 21 and 31 days, no matter what the

preliminary results of the vote are. A vote can't be called off

simply because 400 ``no'' votes have come in and only two ``yes''

votes. The Call for Votes should include the exact date that the

voting period will end---only those votes arriving on the vote-taker's

machine before this date can be counted.

To keep awareness high, the CFV can be repeated during the vote,

provided that it gives the same clear, unbiased instructions for

casting a vote as the original; it also has to be the same proposal as

was first posted. The charter can't change in mid-vote. Also, votes

that're posted don't count---only those that were mailed to the

vote-taker can be tallied.

Partial results should never be included; only a statement of

the specific proposal, that a vote is in progress on it, and how to

cast a vote. A mass acknowledgement (``Mass ACK'' or ``Vote ACK'') is

permitted; however, it must be presented in a way that gives no

indication of which way a person voted. One way to avoid this is to

create one large list of everyone who's voted, and sort it in

alphabetical order. It should not be two sorted lists (of the yes and

no votes, respectively).

Every vote is autonomous. The votes for or against one group can't be

transferred to another, similar proposal. A vote can only count for

the exact proposal that it was a response to. In particular, a vote

for or against a newsgroup under one name can't be counted as a vote

for or against another group with a different name or charter, a

different moderated/unmoderated status, or, if it's moderated, a

different moderator or set of moderators. Whew!

Finally, the vote has to be explicit; they should be of the form I

vote for the group foo.bar as proposed or I vote against the group

foo.bar as proposed. The wording doesn't have to be exact, your

intention just has to be clear.

The Result of a Vote

At the end of the voting period, the vote-taker has to post (to

news.announce.newgroups) the tally and email addresses of the votes

received. Again, it can also be posted to any of the groups listed in

the original CFV. The tally should make clear which way a person

voted, so the results can be verified if it proves necessary to do so.

After the vote result is posted to news.announce.newgroups,

there is a mandatory five-day waiting period. This affords everyone

the opportunity to correct any errors or inconsistencies in the voter

list or the voting procedure.

Creation of the Group

If, after the waiting period, there are no serious objections that

might invalidate the vote, the vote is put to the ``water test.'' If

there were 100 more valid YES/create votes than NO/don't create

votes, and at least two-thirds of the total number of votes are in

favor of creation, then a newgroup control message can be sent out

(often by the moderator of news.announce.newgroups). If the 100-vote

margin or the two-thirds percentage isn't met, the group has failed

and can't be created.

If the proposal failed, all is not lost---after a six-month waiting

period (a ``cooling down''), a new Request For Discussion can be posted

to news.groups, and the whole process can start over again. If after

a couple of tries it becomes obvious that the group is not

wanted or needed, the vote-taker should humbly step back and accept

the opinion of the majority. (As life goes, so goes Usenet.)

--------

Glossary

This glossary is only a tiny subset of all of the various terms and

other things that people regularly use on The Net. For a more

complete (and very entertaining) reference, it's suggested you get a

copy of The New Hacker's Dictionary, which is based on a VERY large

text file called the Jargon File. Edited by Eric Raymond

(eric@snark.thyrsus.com), it is available from the MIT Press,

Cambridge, Massachusetts, 02142; its ISBN number is 0-262-68069-6.

Also see RFC-1208, A Glossary of Networking Terms.

:-)

This odd symbol is one of the ways a person can portray ``mood'' in

the very flat medium of computers---by using ``smilies.'' This is

`metacommunication', and there are literally hundreds of them, from

the obvious to the obscure. This particular example expresses

``happiness.'' Don't see it? Tilt your head to the left 90 degrees.

Smilies are also used to denote sarcasm.

Network addresses are usually of two types:

the physical or hardware address of a network interface card; for

ethernet this 48-bit address might be 0260.8C00.7666. The hardware

address is used to forward packets within a physical network.

Fortunately, network users do not have to be concerned about hardware

addresses since they are automatically handled by the networking

software.

The logical or Internet address is used to facilitate moving data

between physical networks. The 32-bit Internet address is made up of a

network number, a subnetwork number, and a host number. Each host

computer on the Internet, has a unique address. For example, all

Internet addresses at Colorado State have a network number of 129.82, a

subnet number in the range of 1-254, and a host number in the range of

1-254. All Internet hosts have a numeric address and an English-style

name. For example, the Internet address for UCC's CYBER 840 is

129.82.103.96; its Internet name is csugreen.UCC.ColoState.EDU.

address resolution

Conversion of an Internet address to the corresponding physical address.

On an ethernet, resolution requires broadcasting on the local area network.

administrivia

Administrative tasks, most often related to the maintenance of mailing

lists, digests, news gateways, etc.

anonymous FTP

Also known as ``anon FTP''; a service provided to make files available

to the general Internet community---Anonymous FTP.

ANSI

The American National Standards Institute disseminates basic standards

like ASCII, and acts as the United States' delegate to the ISO.

Standards can be ordered from ANSI by writing to the ANSI Sales Department,

1430 Broadway, New York, NY 10018, or by telephoning (212) 354-3300.

archie

A service which provides lookups for packages in a database of the

offerings of countless of anonymous FTP sites. archie for a

full description.

archive server

An email-based file transfer facility offered by some systems.

ARPA (Advanced Research Projects Agency)

Former name of DARPA, the government agency that funded ARPAnet and

later the DARPA Internet.

ARPAnet

A pioneering long haul network funded by ARPA. It

served as the basis for early networking research as well as a

central backbone during the development of the Internet. The

ARPAnet consisted of individual packet switching computers

interconnected by leased lines. The ARPAnet no longer exists as a

singular entity.

asynchronous

Transmission by individual bytes, not related to specific timing on the

transmitting end.

auto-magic

Something which happens pseudo-automatically, and is usually too

complex to go into any further than to say it happens ``auto-magically.''

backbone

A high-speed connection within a network that connects shorter,

usually slower circuits. Also used in reference to a system that acts

as a ``hub'' for activity (although those are becoming much less

prevalent now than they were ten years ago).

bandwidth

The capacity of a medium to transmit a signal. More informally, the

mythical ``size'' of The Net, and its ability to carry the files and

messages of those that use it. Some view certain kinds of traffic

(FTPing hundreds of graphics images, for example) as a ``waste of

bandwidth'' and look down upon them.

BITNET (Because It's Time Network)

An NJE-based international educational network.

bounce

The return of a piece of mail because of an error in its delivery.

btw

An abbreviation for ``by the way.''

CFV (Call For Votes)

Initiates the voting period for a Usenet newsgroup. At least one

(occasionally two or more) email address is customarily included as a

repository for the votes. See Newsgroup Creation

for a full description of the Usenet voting process.

ClariNews

The fee-based Usenet newsfeed available from ClariNet Communications.

client

The user of a network service; also used to describe a computer that

relies upon another for some or all of its resources.

Cyberspace

A term coined by William Gibson in his fantasy novel

Neuromancer to describe the ``world'' of computers, and the

society that gathers around them.

datagram

The basic unit of information passed across the Internet. It contains

a source and destination address along with data. Large messages are

broken down into a sequence of IP datagrams.

disassembling

Converting a binary program into human-readable machine language code.

DNS (Domain Name System)

The method used to convert Internet names to their corresponding

Internet numbers.

domain

A part of the naming hierarchy. Syntactically, a domain name consists

of a sequence of names or other words separated by dots.

dotted quad

A set of four numbers connected with periods that make up an Internet

address; for example, 147.31.254.130.

The vernacular abbreviation for electronic mail.

email address

The UUCP or domain-based address that a user is referred to with. For

example, the author's address is brendan@cs.widener.edu.

ethernet

A 10-million bit per second networking scheme originally developed by

Xerox Corporation. Ethernet is widely used for LANs because it can

network a wide variety of computers, it is not proprietary, and

components are widely available from many commercial sources.

FDDI (Fiber Distributed Data Interface)

An emerging standard for network technology based on fiber optics that

has been established by ANSI. FDDI specifies a 100-million bit per

second data rate. The access control mechanism uses token ring

technology.

flame

A piece of mail or a Usenet posting which is violently argumentative.

FQDN (Fully Qualified Domain Name)

The FQDN is the full site name of a system, rather than just its

hostname. For example, the system lisa at Widener University

has a FQDN of lisa.cs.widener.edu.

FTP (File Transfer Protocol)

The Internet standard high-level protocol for transferring files from

one computer to another.

FYI

An abbreviation for the phrase ``for your information.'' There is

also a series of RFCs put out by the Network Information Center called

FYIs; they address common questions of new users and many other useful

things. RFCs for instructions on retrieving FYIs.

gateway

A special-purpose dedicated computer that attaches to two or more

networks and routes packets from one network to the other. In

particular, an Internet gateway routes IP datagrams among the networks

it connects. Gateways route packets to other gateways until they can be

delivered to the final destination directly across one physical network.

header

The portion of a packet, preceding the actual data, containing source

and destination addresses and error-checking fields. Also part of a

message or news article.

hostname

The name given to a machine. (See also FQDN.)

IMHO (In My Humble Opinion)

This usually accompanies a statement that may bring about personal

offense or strong disagreement.

Internet

A concatenation of many individual TCP/IP campus, state, regional, and

national networks (such as NSFnet, ARPAnet, and Milnet) into one

single logical network all sharing a common addressing scheme.

Internet number

The dotted-quad address used to specify a certain system. The

Internet number for the site cs.widener.edu is 147.31.254.130. A

resolver is used to translate between hostnames and Internet

addresses.

interoperate

The ability of multi-vendor computers to work together using a common

set of protocols. With interoperability, PCs, Macs, Suns, Dec VAXen,

CDC Cybers, etc, all work together allowing one host computer to

communicate with and take advantage of the resources of another.

ISO (International Organization for Standardization)

Coordinator of the main networking standards that are put into use today.

kernel

The level of an operating system or networking system that contains the

system-level commands or all of the functions hidden from the user. In

a Unix system, the kernel is a program that contains the device drivers,

the memory management routines, the scheduler, and system calls. This

program is always running while the system is operating.

LAN (Local Area Network)

Any physical network technology that operates at high speed over short

distances (up to a few thousand meters).

mail gateway

A machine that connects to two or more electronic mail systems

(especially dissimilar mail systems on two different networks) and

transfers mail messages among them.

mailing list

A possibly moderated discussion group, distributed via email from a

central computer maintaining the list of people involved in the

discussion.

mail path

A series of machine names used to direct electronic mail from one user

to another.

medium

The material used to support the transmission of data. This can be

copper wire, coaxial cable, optical fiber, or electromagnetic wave (as in

microwave).

multiplex

The division of a single transmission medium into multiple logical

channels supporting many simultaneous sessions. For example, one

network may have simultaneous FTP, telnet, rlogin, and SMTP

connections, all going at the same time.

net.citizen

An inhabitant of Cyberspace. One usually tries to be a good

net.citizen, lest one be flamed.

netiquette

A pun on ``etiquette''; proper behavior on The Net. Usenet Netiquette.

network

A group of machines connected together so they can transmit information

to one another. There are two kinds of networks: local networks and

remote networks.

NFS (Network File System)

A method developed by Sun Microsystems to allow computers to share

files across a network in a way that makes them appear as if they're

``local'' to the system.

NIC

The Network Information Center.

node

A computer that is attached to a network; also called a host.

NSFnet

The national backbone network, funded by the National Science Foundation

and operated by the Merit Corporation, used to interconnect regional

(mid-level) networks such as WestNet to one another.

packet

The unit of data sent across a packet switching network. The term is

used loosely. While some Internet literature uses it to refer

specifically to data sent across a physical network, other literature

views the Internet as a packet switching network and describes IP

datagrams as packets.

polling

Connecting to another system to check for things like mail or news.

postmaster

The person responsible for taking care of mail problems, answering

queries about users, and other related work at a site.

protocols

A formal description of message formats and the rules two computers must

follow to exchange those messages. Protocols can describe low-level

details of machine-to-machine interfaces (e.g., the order in which bits

and bytes are sent across a wire) or high-level exchanges between

allocation programs (e.g., the way in which two programs transfer a file

across the Internet).

recursion

The facility of a programming language to be able to call functions

from within themselves.

resolve

Translate an Internet name into its equivalent IP address or other DNS

information.

RFD (Request For Discussion)

Usually a two- to three-week period in which the particulars of

newsgroup creation are battled out.

route

The path that network traffic takes from its source to its destination.

router

A dedicated computer (or other device) that sends packets from one

place to another, paying attention to the current state of the network.

RTFM (Read The Fantastic Manual).

This anacronym is often used when someone asks a simple or common

question. The word `Fantastic' is usually replaced with one much more

vulgar.

SMTP (Simple Mail Transfer Protocol)

The Internet standard protocol for transferring electronic mail messages

from one computer to another. SMTP specifies how two mail systems

interact and the format of control messages they exchange to transfer

mail.

server

A computer that shares its resources, such as printers and files, with

other computers on the network. An example of this is a Network File

System (NFS) server which shares its disk space with other computers.

signal-to-noise ratio

When used in reference to Usenet activity, signal-to-noise

ratio describes the relation between amount of actual information in

a discussion, compared to their quantity. More often than not,

there's substantial activity in a newsgroup, but a very small number

of those articles actually contain anything useful.

signature

The small, usually four-line message at the bottom of a piece of email

or a Usenet article. In Unix, it's added by creating a file

..signature in the user's home directory. Large signatures are

a no-no.

summarize

To encapsulate a number of responses into one coherent, usable

message. Often done on controlled mailing lists or active newsgroups,

to help reduce bandwidth.

synchronous

Data communications in which transmissions are sent at a fixed rate,

with the sending and receiving devices synchronized.

TCP/IP (Transmission Control Protocol/Internet Protocol)

A set of protocols, resulting from ARPA efforts, used by the Internet to

support services such as remote login (telnet), file transfer

(FTP) and mail (SMTP).

telnet

The Internet standard protocol for remote terminal connection service.

Telnet allows a user at one site to interact with a remote timesharing

system at another site as if the user's terminal were connected directly

to the remote computer.

terminal server

A small, specialized, networked computer that connects many terminals to

a LAN through one network connection. Any user on the network can then

connect to various network hosts.

TeX

A free typesetting system by Donald Knuth.

twisted pair

Cable made up of a pair of insulated copper wires wrapped around each

other to cancel the effects of electrical noise.

UUCP (Unix to Unix Copy Program)

A store-and-forward system, primarily for Unix systems but currently

supported on other platforms (e.g. VMS and personal computers).

WAN (Wide-Area Network)

A network spanning hundreds or thousands of miles.

workstation

A networked personal computing device with more power than a standard

IBM PC or Macintosh. Typically, a workstation has an operating system

such as unix that is capable of running several tasks at the same time.

It has several megabytes of memory and a large, high-resolution display.

Examples are Sun workstations and Digital DECstations.

worm

A computer program which replicates itself. The Internet worm

(The Internet Worm) was perhaps the most famous; it

successfully (and accidentally) duplicated itself on systems across

the Internet.

wrt

With respect to.

``I hate definitions.''

Benjamin Disraeli

Vivian Grey, bk i chap ii

------

Bibliography

What follows is a compendium of sources that have information that

will be of use to anyone reading this guide. Most of them were used

in the writing of the booklet, while others are simply noted because

they are a must for any good net.citizen's bookshelf.

Books

Comer, Douglas E.

Internetworking With TCP/IP, 2nd ed., 2v

Prentice Hall

Englewood Cliffs, NJ

1991

Davidson, John

An Introduction to TCP/IP

Springer-Verlag

Berlin

1988

Frey, Donnalyn, and Adams, Rick

!@%:: A Directory of Electronic Mail Addressing and Networks

O'Reilly and Associates

Newton, MA

1989

Gibson, William

Neuromancer

Ace

New York, NY

1984

LaQuey, Tracy

Users' Directory of Computer Networks

Digital Press

Bedford, MA

1990

Levy, Stephen

Hackers: Heroes of the Computer Revolution

Anchor Press/Doubleday

Garden City, NY

1984

Partridge, Craig

Innovations in Internetworking

ARTECH House

Norwood, MA

1988

Quarterman, John S.

The Matrix: Computer Networks and Conferencing Systems Worldwide

Digital Press

Bedford, MA

1989

Raymond, Eric (ed)

The New Hacker's Dictionary

MIT Press

Cambridge, MA

1991

Stoll, Clifford

The Cuckoo's Egg

Doubleday

New York

1989

Tanenbaum, Andrew S.

Computer Networks, 2d ed

Prentice-Hall

Englewood Cliffs, NJ

1988

Todinao, Grace

Using UUCP and USENET: A Nutshell Handbook

O'Reilly and Associates

Newton, MA

1986

The Waite Group

Unix Communications, 2nd ed.

Howard W. Sams & Company

Indianapolis

1991

Periodicals & Papers

magazine: Barlow, J

Coming Into The Country

Communications of the ACM 34:3

March 1991

Addresses ``Cyberspace''---John Barlow was a co-founder of the EFF.

proceedings: Collyer, G., and Spencer, H

News Need Not Be Slow

Proceedings of the 1987 Winter USENIX Conference

181--90

USENIX Association, Berkeley, CA

January 1987

magazine: Denning, P

The Internet Worm

American Scientist

126--128

March--April 1989

magazine: The Science of Computing: Computer Networks

American Scientist

127--129

March--April 1985

magazine: Frey, D., and Adams, R

USENET: Death by Success?

UNIX REVIEW

55--60

August 1987

magazine: Gifford, W. S

ISDN User-Network Interfaces

IEEE Journal on Selected Areas in Communications

343--348

May 1986

magazine: Ginsberg, K

Getting from Here to There

UNIX REVIEW

January 1986

magazine: Hiltz, S. R

The Human Element in Computerized Conferencing Systems

Computer Networks

421--428

December 1978

proceedings: Horton, M

What is a Domain?

Proceedings of the Summer 1984 USENIX Conference

368--372

USENIX Association, Berkeley, CA

June 1984

magazine: Jacobsen, Ole J

Information on TCP/IP

ConneXions---The Interoperability Report

14--15

July 1988

magazine: Jennings, D., et al

Computer Networking for Scientists

Science

943--950

28 February 1986

paper: Markoff, J

``Author of computer `virus' is son of U.S. electronic security expert.''

New York Times

Nov. 5, 1988

paper: ``Computer snarl: A `back door' ajar.''

New York Times

Nov. 7, 1988

B10

magazine: McQuillan, J. M., and Walden, D. C

The ARPA Network Design Decisions

Computer Networks

243--289

1977

magazine: Ornstein, S. M

A letter concerning the Internet worm

Communications of the ACM 32:6

June 1989

proceedings: Partridge, C

Mail Routing Using Domain Names: An Informal Tour

Proceedings of the 1986 Summer USENIX Conference

366--76

USENIX Association, Berkeley, CA

June 1986

magazine: Quarterman, J

Etiquette and Ethics

ConneXions---The Interoperability Report

12--16

March 1989

magazine: Notable Computer Networks

Communications of the ACM 29:10

October 1986

This was the predecessor to The Matrix.

magazine: Raeder, A. W., and Andrews, K. L

Searching Library Catalogs on the Internet: A Survey

Database Searcher 6

16--31

September 1990

proceedings: Seeley, D

A tour of the worm

Proceedings of the 1989 Winter USENIX Conference

287--304

USENIX Association, Berkeley, CA

February 1989

magazine: Shulman, G

Legal Research on USENET Liability Issues

;login: The USENIX Association Newsletter

11--17

December 1984

magazine: Smith, K

E-Mail to Anywhere

PC World

220--223

March 1988

magazine: Stoll, C

Stalking the Wily Hacker

Communications of the ACM 31:5

May 1988

This article grew into the book The Cuckoo's Egg.

proceedings: Taylor, D

The Postman Always Rings Twice: Electronic Mail in a Highly Distributed

Environment

Proceedings of the 1988 Winter USENIX Conference

145--153

USENIX Association, Berkeley, CA

December 1988

magazine: U.S.Gen'l Accounting Ofc

Computer Security: Virus Highlights Need for Improved Internet Management

GAO/IMTEC-89-57,

1989

Addresses the Internet worm.

``And all else is literature.''

Paul Verlaine

The Sun, New York

While he was city editor in 1873--1890.

Bill Walther, Carleton University, Ottawa, Canada

Search This Blog

Strange Texts

Zen and the Art of the Internet

Comments

Post a Comment

Popular posts from this blog

BOTTOM LIVE script

Evidence supporting quantum information processing in animals

ARMIES OF CHAOS