setup for Opus (just the modem parameters)
From : Mike Blair
Subject : Opus/binkley
-------------------------------------------------------------------------------
setup for Opus (just the modem parameters):
% BAUD Steady
BAUD Maximum 19200
INIT |~AT&F2*H2&D2S10=30%C0H&W|~~~~
DIAL Prefix |~~~~ATDT
DIAL Suffix |~~~~
BUSY |~~~~v~~~~^~~~~ATH1M0|~~~~~~~~v~~~~
MASK Carrier 128
% MASK Handshaking XON
MASK Handshaking CTS
MASK Handshaking DSR
SEND Break to clear buffer
% SLOW Modem
As you can see I have commented OUT XON, Baud Steady, and Slow Modem.
The only problem that I have with this configuration is that with XON
commented out (as per the instructions in the Compucom manual) is that the
users that want to use ctrl-s, and ctrl-q (for pausing and un-pausing) can't
do so. But otherwise everything else works very well.
Here is my modem parameters for the Compucom and BinkleyTerm:
Port 1
Baud 19200
; Autobaud
Carrier 60
Init |~~AT&F2*H2&D2%C0S10=30H0&W|
Prefix |ATDT
Busy |~ATM0H1|~v
Answer ATA|
; PreDial `
PreInit |v``^``
As you can see everything is pretty simple, and straight-forward.
Nothing complicated here at all, which is the way I like things. :)
* Origin: Morning Star BBS, Jesus Loves You! (8:7705/1)
Comments
Post a Comment